====================================================================
    System Requirements and Limitations for Dataplex v1.3.0.1
====================================================================

SYSTEM REQUIREMENTS


- Windows 7 only. 


LIMITATIONS

- When a boot drive is selected to be the Target Drive, the drive 
  must be configured as MBR (Master Boot Record).

- Multiple-Operating Systems / dual-boot configurations are not 
  supported. 

- If the selected Target drive has the Windows installation 
  (C:\Windows folder), it must also have Windows System Partition
  (100MB partition) on the same drive and vice-versa.

- Only one cache SSD is supported in a system.

- There cannot be two identical SSDs in the system, one of which 
  is to be used as cache.

- Use of RAID sets as the cache drive is not supported.

- The following configuration(s) are not supported:
  -- NVIDIA storage controllers
  -- VIA storage controllers
  -- Adaptec storage controllers



KNOWN ISSUES

- If after uninstallation of Dataplex, the system is restored to 
  a prior state in which Dataplex was installed, Dataplex will be 
  started in a disabled state. 


====================================================================
 DISCLAIMER: NVELO may make changes to specification and product 
 descriptions at any time, without notice.

 (c) 2012 NVELO, Inc.  All rights reserved.          www.nvelo.com
====================================================================


