Home News Reviews Forums Shop


Backing up used DVD-video discs can u recommend best h-ware

DVD-R/W, DVD+R/RW, DVD-RAM

Backing up used DVD-video discs can u recommend best h-ware

Postby santaclaws on Tue Sep 14, 2004 12:22 am

Hi there

I'm looking for feedback from those who have had great success backing up used DVD-video discs.

My Pioneer 107D reads and rips fine but when I try to write I nearly always get CR Errors and the write process stops or the discs are coasters! Reviews I've read say it's a known shortfall with the 107D (and also the NEC 2500)- very fussy about Video disc surface quality. I have tried a variety of ripping and burning software and upgraded my firmware. No help unfortunately.

If you have no trouble with used DVD discs please let me know what DVD hardware you are ripping with. The hardware that the reviews suggest is Plextor 708A or Sony DRU-530A. Lite-On 812/832/Sony U18A get so so reviews when it comes to accurate reading of scratched DVD-video discs.

Cheers
santaclaws
Buffer Underrun
 
Posts: 2
Joined: Mon Sep 13, 2004 2:12 am

Postby DVD_ADDICT on Tue Sep 14, 2004 2:22 am

USED DVD DISCS?
dunno what you mean but i got a plextor 708a, that has no problem in reading discs that are scratched. i use nero version 5.5.10.42, dvd shrink 3.05 beta and the latest version, dvd decrypter, & img tool burn. i also have a pioneer 107d with nils hack 12x rip which i use the latest nero ultra with it and have no problems with scratched discs. i use the same above software with the pioneer and no problems. :)
User avatar
DVD_ADDICT
CD-RW Player
 
Posts: 186
Joined: Wed Nov 19, 2003 3:24 am

Postby Vanderlow on Tue Sep 14, 2004 3:24 pm

In the thread someone mentioned the Aopen 1648 DVD-ROM to have very good correction abilities (below). Also Cdrinfo.com gave the benQ DW1620 burner good error correction score.

packetloss:
I base it on a very detailed review by the well known german c't magazine (8/2004). I could scan the review and post it here, but that would be against copyright laws. I can however post the results here, and other people who read it can confirm it if necessary. Here is a comparison between the Aopen and the Toshiba SD-M1802.


Error Correction

Special scratched discs (CD, DVD, DVD9) are tested. The test shows how many sectors of those discs can still be read by the drives (in percent).

Aopen 1648/AAP:

CD: 95.9%
DVD: 99.9%
DVD9: 90.3%


Toshiba SD-M1802

CD: 83.8%
DVD: 49.6%
DVD9: 82.0%


The Aopen was the only drive with a recovery rate of over 90% in all three categories (CD, DVD, DVD9).

And having tested quite a few drives myself over the years (including the Toshiba, LiteOn and Pioneer drives), I can confirm this result this with personal experience.


http://club.cdfreaks.com/showthread.php?t=106120

$29 at NewEgg and with multi color faceplates included.
User avatar
Vanderlow
CD-RW Player
 
Posts: 255
Joined: Sun Nov 02, 2003 3:45 pm
Location: Indiana USA

Postby santaclaws on Tue Sep 14, 2004 8:05 pm

Thanks for the input. I've resorted to writing at 2x! And it seems to work even when material was ripped at full speed. Must be a write error after all. Maybe my 107D is just a lemon.

The Aopen sounds like the machine for me.

I'll look into Nils 12x firmware you mentioned. Thanks again for your input.
santaclaws
Buffer Underrun
 
Posts: 2
Joined: Mon Sep 13, 2004 2:12 am

Postby guggu on Tue Sep 21, 2004 8:32 pm

IF you are getting CRC errors the disks can be repaired by using DVD Resuce which is part of DVDXCopy. Another way of burning these are by using a NT command called ROBOCOPY. Robocopy is used to copy all folders.
Here is an Example : Being that ROBOCOPY.exe is in the root of c drive
c:\Robocopy e:\video_ts c:\dvd
What this does is copy the whole directory to a folder on c drive named DVD. Then use Nero and select MAKE DVD and place all the files in the VIDEO_TS directory and burn away.
Make sure you use your DVD reader to copy to the hard drive as does not always work with the burner.
I use a Lite-on DVD reader model SOHD-167T and used the firmware update posted in my other thread by http://codeguys.rpc1.org
Also my burner is a pioneer 108. I did have a Ricoh 4x and worked fine as well.
guggu
Buffer Underrun
 
Posts: 9
Joined: Wed Sep 15, 2004 7:13 pm
Location: Australia


Return to DVD Writers

Who is online

Users browsing this forum: No registered users and 7 guests

cron
All Content is Copyright (c) 2001-2024 CDRLabs Inc.