by wonderwrench on Tue Jan 18, 2005 11:44 pm
Well sorry to say but 6.6.0.6 has the same problem as 6.6.0.5
I made a new image using Recode from NVE3014 and this image was used for both burns. File size 4.35 GB (4,676,989,084 bytes).
Log files below. I found a firmware update for my plextor PX-716A, ver 1.03 (had 1.00) so I updated but still no joy.
Note: both 6.6.0.5 and 6.6.0.6 burning rom also have problems remembering screen size settings. They will not remember a full screen setting and you must click the maximize twice to get any results.
Log 6.6.0.1 completed burn
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.03 - HA 0 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW-F1E >Version: 1.0g - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA3 atapi Port 1 ID 0 DMA: On
: epstw2k Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
YAMAHA CRW-F1E F: CDRom0
PLEXTOR DVDR PX-716A G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 658MB (673936kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.1.2005
Burn DVD Image
8:20:06 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
8:20:06 PM #2 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running
8:20:06 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 382021632
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=507:27.11 ( 2283536)
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\Temp\DT2.nrg>
8:20:06 PM #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using media
8:20:07 PM #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283535 (507:27.10, 4460MB)
8:20:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
8:20:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
8:20:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:20:07 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283536 (2283536) = #2283536/507:27.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283536 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------
8:20:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676681728, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2283536 | lead-out | 1 | 0x00 | 0x41
8:20:07 PM #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
8:20:07 PM #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
8:20:07 PM #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
8:20:07 PM #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 8x (11,080 KB/s)
8:20:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:20:07 PM #16 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
8:20:07 PM #17 Text 0 File DVDR.cpp, Line 4936
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
8:20:07 PM #18 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM
8:20:07 PM #19 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 7:10,868 (430868ms) -> OK
8:20:07 PM #20 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: No
8:20:09 PM #21 Text 0 File Cdrdrv.cpp, Line 1284
20:20:09.718 - PLEXTOR DVDR PX-716A\H0 T1 : Queue again later
8:27:56 PM #22 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 2283536 (22D810h), lenght 0 blocks
8:27:56 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:28:13 PM #24 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
8:28:13 PM #25 Text 0 File DVDR.cpp, Line 4936
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD+R
Changing the Book Type was finished successfully, return code 0
8:28:13 PM #26 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
8:28:13 PM #27 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
---------------------------------------------------------------------------------
Log 6.6.0.6 failed burn
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW-F1E >Version: 1.0g - HA 0 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA3 atapi Port 1 ID 0 DMA: On
: epstw2k Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
YAMAHA CRW-F1E F: CDRom0
PLEXTOR DVDR PX-716A G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 680MB (696648kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.1.2005
Burn DVD Image
7:58:44 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
7:58:44 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 4676988928
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:27.11 ( 2283536) RecDep=0x00
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\Temp\DT2.nrg>
7:58:44 PM #3 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using media
7:58:44 PM #4 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283685 (507:29.10, 4460MB)
7:58:44 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
7:58:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
7:58:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:58:44 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283536 (2283536) = #2283536/507:27.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283536 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------
7:58:44 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4676988928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
150 | 1 | 1 | 0x41 | 0x00
2283686 | lead-out | 1 | 0x41 | 0x00
7:58:44 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:58:44 PM #11 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
7:58:44 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:58:44 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
7:58:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2598
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): target disc position #150 differs
7:58:44 PM #15 TRANSFER -30 File ThreadedTransferInterface.cpp, Line 2599
Cannot write track at correct position with this recorder
7:58:44 PM #16 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for your time