Home News Reviews Forums Shop


Sony DW U18A (Now Sony DRU 700A)

DVD-R/W, DVD+R/RW, DVD-RAM

Sony DW U18A (Now Sony DRU 700A)

Postby BelGarion on Tue Oct 11, 2005 7:41 pm

Been having issues with the drive and was curious if anyone knew, perhaps, why?

1 good out of 6 so far, the first failed, but that's because I hadn't fixed Win2k *yet* (Fresh install tends to put ROM drives into PIO mode, I switched it to DMA mode to fix that) the second succeeded, and 3rd to 6th have failed. Usually read errors of certain sectors , though the second to last was a "Sesson Fixation Error " / "Invalid writestate" error.

Upgraded the ROM so it's a Sony DRU 700A, dismantled the drive to clean it out inside. Now it's in the middle of a verify and the verify is going so slow that Nero doesn't even display the "X" #. Just says "Verifying the compliation at 1,344 KB/s" , which drops down to about 500 KB/s and up to over 2,000 KB/s where when it reachs 1x speed it'll again start displaying the "X" number.

<lets this idle and waits for the verify to finish>

Another thing, the brand new discs come out with scratchs and grooves on the outer rim, I made sure the computer, which is on the floor, was solid and it is, it doesn't wiggle an inch. But they go in perfect, no scratchs or grooves at all, like brand new discs should. I could try to get the scanner up and running if anyone wants pics of the scratched dye side.

<watchs it start to spew Read Errors> Ok. Here is the log of what happened. If anyone want the previous "Session Fixation Error" / "Invalid writestate" log, I saved that one too.

<looks at the just burned and failed disc> Yeap, scratched on the outer edge. Takes a flashlight at an angle and it shows up clear as day. Anyway, the log file.

-----------------------------

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h

Recorder: <SONY DVD RW DRU-700A> Version: CG5J - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1612 >Version: DYS3 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400AB-32BVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-700A G: CDRom2
SONY DVD-ROM DDU1612 H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 132MB (135448kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.10.2005
ISO compilation
3:09:54 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:09:54 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

3:09:54 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running

3:09:54 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:09:54 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

3:09:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2295807 (510:10.57, 4483MB)

3:09:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)

3:09:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

3:09:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:09:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2295808 (2295808) = #2295808/510:10.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295808 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------

3:09:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4701814784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295808 | lead-out | 1 | 0x41 | 0x00

3:09:55 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

3:09:55 PM #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

3:09:55 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

3:09:55 PM #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

3:09:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:12:56 PM #17 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2295808 (230800h), lenght 0 blocks

3:12:56 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:12:57 PM #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 18.6x (25,690 KB/s)

3:12:57 PM #20 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)

3:12:57 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:12:57 PM #22 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode

3:12:57 PM #23 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

3:12:57 PM #24 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes

3:12:57 PM #25 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:13:00 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
15:13:00.218 - SONY DVD RW DRU-700A\H1 T0 : Queue again later

3:27:42 PM #27 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2295808 (230800h), lenght 0 blocks

3:27:42 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:27:42 PM #29 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was 2295807

3:28:10 PM #30 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)

3:28:11 PM #31 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

3:28:11 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:28:12 PM #33 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode

3:28:12 PM #34 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

3:28:12 PM #35 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes

3:28:12 PM #36 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:28:31 PM #37 Text 0 File Cdrdrv.cpp, Line 1288
15:28:31.500 - SONY DVD RW DRU-700A\H1 T0 : Queue again later

3:43:12 PM #38 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-700A > start writing Lead-Out at LBA 2295808 (230800h), lenght 0 blocks

3:43:12 PM #39 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:43:12 PM #40 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was 2295807

3:43:36 PM #41 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)

3:43:36 PM #42 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

3:54:41 PM #43 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x08 0xA2 0x90 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:21:03 PM #44 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0x82 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:21:03 PM #45 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 565904 to 565919

4:21:15 PM #46 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0x86 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:21:15 PM #47 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1802976 to 1802991

4:21:35 PM #48 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xA0 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:21:35 PM #49 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1804000 to 1804015

4:21:49 PM #50 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xA9 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:21:49 PM #51 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1810544 to 1810559

4:22:01 PM #52 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xA9 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:22:01 PM #53 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1812864 to 1812879

4:22:18 PM #54 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xB7 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:22:18 PM #55 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1812928 to 1812943

4:22:24 PM #56 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xB7 0x10 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:22:36 PM #57 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xB7 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:22:50 PM #58 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xB7 0x50 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:22:50 PM #59 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1816320 to 1816367

4:23:03 PM #60 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xB7 0x60 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:23:23 PM #61 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xCF 0x60 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:23:23 PM #62 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1816400 to 1816431

4:23:30 PM #63 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xCF 0x70 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:23:40 PM #64 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xCF 0x80 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:23:51 PM #65 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09C31400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1B 0xCF 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

4:23:51 PM #66 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1822560 to 1822607

4:32:31 PM #67 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:32:31 PM #68 SectorVerify 20 File Cdrdrv.cpp, Line 9852
Read errors from sector 1822656 to 1822671

4:32:31 PM #69 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 10/6/2005 9:28:34 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 10/6/2005 9:28:34 AM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 12:05:04 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

---------------------

My system setup:

AMD Athlon 1900+
Asus A7V 333 X
512mb (one stick) DDR 2100 memory
Windows 2k SP4 (With 48bit LBA enabled as my HDD is 160gb)
Seagate ST3160021A 160gb ATA / 133 HDD
Western Digital WD400AB-32BVA0 40gb HDD
Sony DRU 700A (formerly DW-U18A) DVD RW burner
Sony DDU 1612 DVD ROM

The two HDD are on the primary chain, the Seagate is drive 0, the WD is drive 1, the burner and ROM are on the secondary chain, the burner is drive 0, the ROM is drive 1. The HDD are both in DMA mode, mode 5 (133mb) and not too sure about the burner and ROM, I do know they are in DMA mode.

If you need any other specifications I'll happily provide them. Though I have a feeling it's the drive that's toast. Though the question remains, what during write / verify is scratching the discs? It can't have scratched *before* the write, else I *think* it would give write errors, right? Thanks!

BelGarion
Attachments
Bad DVD R.jpg
The last bad DVD-R, see the scratch at the bottom left?
Bad DVD R.jpg (49.83 KiB) Viewed 1355 times
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion.
I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain.
Time to die.

Roy
BelGarion
Buffer Underrun
 
Posts: 9
Joined: Tue Oct 11, 2005 2:36 am

Return to DVD Writers

Who is online

Users browsing this forum: No registered users and 15 guests

cron
All Content is Copyright (c) 2001-2024 CDRLabs Inc.