Page 1 of 1

Micro Advantage 52/24/52 coasters

PostPosted: Tue Jul 08, 2003 10:36 am
by Kelvin
I am using the bundled Nero 5.5.9.16 with all default settings. With Fuji 700 meg. 48x media, Superlink sets the write speed at 52x, my simlation does fine, but then I get get this message during the burn "End of user area of this track"
Here's a paste from the log
11:09:32 PM #20 Phase 33 File dlgbrnst.cpp, Line 1571
Simulation completed successfully at 52x (7,800 KB/s)

11:09:32 PM #21 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 52x (7,800 KB/s)

11:09:32 PM #22 ISO9660GEN -11 File geniso.cpp, Line 4486
First writeable address = 354774 (0x000569D6)

11:09:32 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #354774

11:09:32 PM #24 Text 0 File Mmc.cpp, Line 17407
Set BUFE: Super Link -> ON

11:09:52 PM #25 SCSI -1037 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x022C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x63
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x7D 0x93 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x63 0x00

11:09:52 PM #26 MMC -1037 File Writer.cpp, Line 335
End of user area of this track

11:09:52 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

11:09:52 PM #28 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

11:09:58 PM #29 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state

11:09:58 PM #30 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack

11:10:18 PM #31 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 52x (7,800 KB/s)



This is with 647 megs of data, blank disk, start multisession, just an ordinary data disk, It'll say could not perform Endtrack, and then will write the leadin, leadout, and fail it writes data only about 25 secs, it is NOT readable in windows explorer(win98) I have sucesfully burned to Verbatim 4x rw media.
should I try at a slower speed, is the drive crap, am I doing something wrong in nero?
I appreciate any help somebody can give, my old Ricoh 4/4/20x with direct cd worked fine on this system.
this is the first attempt to write to highspeed media, the drive is new, but if I can't get it to work it has to go back by tommorow
Thanx!!!
[/quote]

PostPosted: Tue Jul 08, 2003 10:46 am
by Kelvin
update, I just burned a Nero CD Speed disk, at 52x with the "create data cd" tool. it took 2:29 it's error free according to CD Speed's Quality check
Maybe my problem is in Nero

PostPosted: Tue Jul 08, 2003 11:40 am
by Ian
I would try downloading the latest version of Nero from www.nero.com

PostPosted: Tue Jul 08, 2003 11:42 am
by rdgrimes
I think multisession consumes some space, but I forget how much. Try the same burn with no multisession. Also lower your burn speed, just on principle.

Whew!!

PostPosted: Tue Jul 08, 2003 4:14 pm
by Kelvin
I just finished burning the same data set @ 52x on this same Fuji media.
I updated Nero to v.5.5.10.42 (the latest), and I did it in TAO (no multisession) worked just fine, took 4:15 including leadin/leadout
I don't know what resolved it, I chose to do everything and then try a burn, instead of making more coasters.
Thanks for the help; and I guess I'll be keeping this drive

PostPosted: Tue Jul 08, 2003 4:21 pm
by rdgrimes
Suggest you get in the habit of burning DAO/98 or DAO unless you specifically want to leave a disc open.

PostPosted: Tue Jul 08, 2003 4:25 pm
by Kelvin
one other question, do ya'll think that doing multisession was the problem, or something else, I'm new to Nero, so I'm not real familier with how it's supposed to work

PostPosted: Tue Jul 08, 2003 4:33 pm
by rdgrimes
Multisession consumes more space, and adds overhead for each session. Leaving the disc open also takes more space.