Page 1 of 1

Problem reading a Fuji CD-R

PostPosted: Sat Jul 26, 2003 12:43 am
by Hibiki04
I'm currently having trouble reading blank CD-R Fuji-Film 48X CD-Rs (the spindle without the turning nob on top of the spindle) on my Lite-On LTR 48125W (firmware S0B). This is the first time this has every happened. When I insert the blank CD-R into my Lite-On, its seems like the Lite-On drive doesn't even recognize that the cd has already been inserted.

Is there anyway I can resolve this so that I can start burning these blacnks cds

Can anyone help me please.
Thanks for your replies in advance

PostPosted: Sat Jul 26, 2003 1:19 pm
by aviationwiz
I'm not sure, but I would recomend updating to the latest firmware. VS0D.

PostPosted: Sat Jul 26, 2003 4:12 pm
by CDRecorder
Does your LTR-48125W work with other blank CDs?

PostPosted: Sat Jul 26, 2003 4:41 pm
by Hibiki04
Firmware for the drive has been updated to VS0D and it still doesn't work.
And also, yup, it still works with other blanks CDs, Just tried a Memorx (TY), and that works fine.

Any other suggestions in solving this problem?

PostPosted: Sat Jul 26, 2003 6:11 pm
by UALOneKPlus
First make sure DMA is enabled.

Then try the Fuji CD-R on another burner.

I've never had problems with Fuji CD-R, but it's possible you got a bad batch of CD-R's due to problems in production, mishandling during packing, etc...

If the Fuji CD-Rs are readable by another burner, then you've got a strange media incompatibility problem, or your Lite-On burner is slowly dying (most likely).

PostPosted: Sat Jul 26, 2003 6:58 pm
by CDRecorder
I would guess that the Fuji CD-R is the problem because the drive works with other TY CD-Rs.