Page 1 of 1
CD-R & DVD-R RECORDING
Posted:
Tue Nov 04, 2003 9:39 pmby bill2
Hi,
I hope someone can help,I have a Hitarchi DVD-ROM 750 and a Pioneer dvd-rw 106 +- installed,when I try to copy disc to disc or hdd to disc I can only copy at half speed,the buffer underrun flutuates from 10% to 99% all the time as though something is running in the background,I very new to copying,both cd,s and dvd,s are affected,I would be grateful of any help or advice,
Thanks,
Bill.
MSI K7N2 Motherboard
AMD 2500+ Processer
1Gb 3200 Memory
1 120 HDD
1 60 HDD
GeForce3 Graphic,s card
Windows xp home sp1 Edition
Posted:
Tue Nov 04, 2003 10:58 pmby rdgrimes
you do not have DMA enabled on all drives.
Assuming XP or 2K, go to device manager and open the entry for the IDE controller, (both channels), enable DMA on all HD's and DVD drives.
Posted:
Wed Nov 05, 2003 12:22 amby dodecahedron
CD-R & DVD-R RECORDING
Posted:
Wed Nov 05, 2003 4:05 pmby bill2
Hello,
Thanks to both of you,I did as you adviced, you was right,the secondry IDE Device was the problem,I uninstalled the device and restarted my system and it was then set to Ultra DMD Mode 2,it seems to have solved the problem with CD-R,S,but copying a DVD is still the same,I know the disc I am copying it a good copy as it,s some data a friend of mine copied for me to test my system,my Primery IDE device is set to Ultra DMA Mode5,is this normal?,if there any other advice you can help me for the DVD copying I would be very grateful,hope you can understand what I mean,
again thank you,
Bill.
Posted:
Wed Nov 05, 2003 4:30 pmby rdgrimes
DVD readers generally only read recordable or dual-layer discs at 6x or 8x max. Would that be your situation?
Re: CD-R & DVD-R RECORDING
Posted:
Wed Nov 05, 2003 7:18 pmby dodecahedron
bill2 wrote:my Primery IDE device is set to Ultra DMA Mode5,is this normal?
yes, hard drives should be Ultra DMA mode 5 (or 6)
CD-R & DVD-R RECORDING
Posted:
Wed Nov 05, 2003 10:35 pmby bill2
Thank you all for your help,I still have the problem of copying DVD,s,can anyone help with this,I posted this on another section(by mistake) and was asked what my configuration was,it is as follows,
Primery IDE Channel
Master Maxtor 60Gb HDD DMA ON
Slave Seagate 120Gb HDD DMA ON
Secondary IDE Channel
Master Pioneer DVD-RW DVR-106D DMA ON
Slave Hitachi DVD-ROM GD-7500 DMA ON
Do,s this make sense or could I configuration be better?,I would be grateful of any help or advice,
thank you,
Bill.