Plextor 16/10/40A no longer burning - Nero gives many errors
Posted: Fri Nov 28, 2003 8:08 am
This just recently started happening... at first, every once in awhile the drive would work for a bit then the light would flash orange twice at a time upon inserting a disc, upon reboot it would work again.
When it came time to burn, it would occasionally stop and do the flashing orange thing... but now it wont burn at all. I even changed the serial cable, still I'm having problems getting power calibration errors and other stuff.
Using Nero 5.5.10.0 on Win 98SE, Plextor 16/10/40A, lots of HD space, 256 megs RAM, blew air into the tray to clean it out, same media I've always used (Memorex 700MB CDRs, spindle):
3:01:58 AM #17 SCSI -1106 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02260000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
3:01:58 AM #18 MMC -1106 File Writer.cpp, Line 331
Power calibration error
3:01:58 AM #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
3:01:58 AM #20 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
3:01:58 AM #21 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
3:01:58 AM #22 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
3:01:58 AM #23 Text 0 File Mmc.cpp, Line 12011
<PLEXTOR CD-R PX-W1610A> start Close Session
3:01:58 AM #24 SCSI -1026 File Cdrdrv.cpp, Line 1189
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04
3:01:58 AM #25 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty
3:01:58 AM #26 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation
3:01:58 AM #27 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation
3:01:58 AM #28 Text 0 File Mmc.cpp, Line 12011
<PLEXTOR CD-R PX-W1610A> start Close Session
3:01:58 AM #29 SCSI -1026 File Cdrdrv.cpp, Line 1189
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04
3:01:58 AM #30 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty
3:01:58 AM #31 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation
3:01:58 AM #32 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 16x (2,400 KB/s)
3:01:58 AM #33 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 5/11/98 8:01:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=0.90.1380, size=45356 bytes, created 11/16/99 4:52:02 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=0.90.1390, size=46380 bytes, created 11/16/99 4:52:18 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.1998, size=69454 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.1998, size=18805 bytes, created 5/11/98 8:01:00 PM
Registry Keys:
----------------------------------------------
Can someone please explain wtf is going on here?
When it came time to burn, it would occasionally stop and do the flashing orange thing... but now it wont burn at all. I even changed the serial cable, still I'm having problems getting power calibration errors and other stuff.
Using Nero 5.5.10.0 on Win 98SE, Plextor 16/10/40A, lots of HD space, 256 megs RAM, blew air into the tray to clean it out, same media I've always used (Memorex 700MB CDRs, spindle):
3:01:58 AM #17 SCSI -1106 File Cdrdrv.cpp, Line 1393
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02260000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
3:01:58 AM #18 MMC -1106 File Writer.cpp, Line 331
Power calibration error
3:01:58 AM #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
3:01:58 AM #20 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
3:01:58 AM #21 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
3:01:58 AM #22 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
3:01:58 AM #23 Text 0 File Mmc.cpp, Line 12011
<PLEXTOR CD-R PX-W1610A> start Close Session
3:01:58 AM #24 SCSI -1026 File Cdrdrv.cpp, Line 1189
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04
3:01:58 AM #25 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty
3:01:58 AM #26 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation
3:01:58 AM #27 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation
3:01:58 AM #28 Text 0 File Mmc.cpp, Line 12011
<PLEXTOR CD-R PX-W1610A> start Close Session
3:01:58 AM #29 SCSI -1026 File Cdrdrv.cpp, Line 1189
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04
3:01:58 AM #30 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty
3:01:58 AM #31 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation
3:01:58 AM #32 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 16x (2,400 KB/s)
3:01:58 AM #33 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 5/11/98 8:01:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=0.90.1380, size=45356 bytes, created 11/16/99 4:52:02 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=0.90.1390, size=46380 bytes, created 11/16/99 4:52:18 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.1998, size=69454 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.1998, size=18805 bytes, created 5/11/98 8:01:00 PM
Registry Keys:
----------------------------------------------
Can someone please explain wtf is going on here?