Page 1 of 1
!!!! STOPS BURNING @ 80% !!!!!
Posted:
Mon Jan 12, 2004 12:07 amby pyo
hey guys, i need help with my TDK 52x CD-Burner...Recently I burned about 15 cd's straight back to back and when it got to the 16th cd, it started to give me cd write errors at around 80% completion...It does this to all cd's I try to burn now...
WHAT IS WRONG!!!!!
I am using Nero 6 and even tried it with Nero 5....
Pc Specs:
XP Pro
3.06 ghz
1024 mb HyperX
160 gb WD and Maxtor
GF4 ti4600
Posted:
Mon Jan 12, 2004 1:00 amby BurninMan921
Uninstall Nero 6; use the Nero clean tool to wipe all traces of nero; install Nero 5.
Nero 6 is one buggy a$$ piece of crap. I've had it stop at 99% or 98% more than a dozen times. I've 100% given up on it. Make sure you get the latest update for Nero 5.5 off of Aheads website...
Posted:
Mon Jan 12, 2004 1:01 amby pyo
where do i get nero clean tool?
Posted:
Mon Jan 12, 2004 1:04 amby BurninMan921
It's on Aheads website (
www.ahead.de) somewhere - I think in the "tools" section. Give me a few minutes and I'll try to find it...
Posted:
Mon Jan 12, 2004 1:08 amby BurninMan921
Posted:
Mon Jan 12, 2004 12:08 pmby tazdevl
I haven't had any issues with the latest version of Nero, 6.3.0.2.
pyo
Might want to update your motherboard inf drivers if you don't have the latest. Also, if you are using an Intel chipset based motherboard and have the Intel Application Accelerator installed, uninstall IAA. It doesn't get along well with optical drives and has been known to cause the problem you are experiencing.
What kind of media are you using? That also could be the problem, not the software.
Lastly, assuming you can, try jumpering the drive to slave and master on its own channel and see which one works better. Can't tell you why, but some drives like to be on their own channel, others don't. Same thing with master and slaves.
Posted:
Mon Jan 12, 2004 6:03 pmby pyo
No IAA installed and just got the new Intel INF drivers updated to newest when i reformatted last. TDK Burner has been on the secondary master ide slot for about 1 year now and has never given me problems before.
Used Jensen, Maxell, Fujifilm, TDK, Optinum, and this other brand...All the same thing...
I don't understand how it can burn 15 cd's and just give on me...It burns to 70% and it sounds like the lens/laser wont go out any further as there is a click* click* noise...
DMA is on....
Posted:
Wed Jan 21, 2004 5:04 pmby NoLimit
it happened with me once and the problem was the crappy media..try to burn at a lower speed.