Page 1 of 1

How sucks is CMC?

PostPosted: Wed Mar 31, 2004 5:36 pm
by Kitto
Many people says CMC CDR are sucks, but I have got some Khypermedia and Imation CDRs from CMC. They burn well in my LTR-52327S QS0C, althougt in max speed. I'd want to know how sucks is CMC. :-?

PostPosted: Wed Mar 31, 2004 9:23 pm
by tazdevl
Very sucky.

www.dvdrhelp.com read the media feedback.

PostPosted: Thu Apr 01, 2004 12:26 am
by Justin42
Ask my spindle of 100 Imation CMC CDRs of which about 75% wouldn't burn properly (they just blew up in the midst of burning with sense errors, not even fail a very or something!)

When I contacted Imation tech support, they didn't seem particularly surprised. I didn't bother getting them replaced cause I didn't want another CMC disc near my burner.

PostPosted: Thu Apr 01, 2004 12:54 am
by Kitto
But the quantity test C1 max average is 2-3, sometimes 1, and no C2 error in my burner...

PostPosted: Thu Apr 01, 2004 1:24 am
by Ian
CMC media varies a lot. While the media from Imation used to be pretty good, others like the KHypermedia stuff is absolute junk.

PostPosted: Thu Apr 01, 2004 9:15 am
by MediumRare
Ian wrote:CMC media varies a lot.

Amen! I will not ever knowingly buy CMC's again. The only usable batch I've encountered were some Fujitsu-Siemens cheapies I mentioned here: http://www.cdrlabs.com/phpBB/viewtopic.php?p=87916#87916.

All others were rotten. The worst experience was with Verbatim DataLife's with 2 different batches in the package, one of which was completely unusable. :evil:

G

PostPosted: Thu Apr 01, 2004 10:05 am
by dolphinius_rex
I've noticed that CMC made black bottomed discs are usually pretty good though. It's the only CMC made product I've ever seen fairly consistant decent results from :o

PostPosted: Thu Apr 01, 2004 2:41 pm
by dforion
My recently purchased TDK High Speed 4x-12x CDRW 5 Pack is CMC. No trouble (yet).

PostPosted: Thu Apr 01, 2004 9:40 pm
by TheWizard
Personally, I've never had a problem using CMC discs, regardless of which label they are branded under. I've used Prime Peripherals 16X, AT&T 40X, Spin-X 40X, Imation various speeds, KHypermedia 32X, Memorex various speeds, Precision 40X, and Staples 24X...all CMC, and all burned fine at the rated speed. Just be sure your CD-RW drive burns CMC discs well, refer to this thread for more info.

PostPosted: Thu Apr 01, 2004 10:16 pm
by CDRecorder
I haven't had many problems with CMC, either. I've mostly used Imation ones, but I've also used CMCs from Philips and Spin-X, and they were usually OK. There were a few which didn't work well, though, and overall, the error rates on the Philips discs were higher than the error rates on the others.

PostPosted: Thu Apr 01, 2004 10:21 pm
by wicked1
I have had memorex CMC discs and the top layer slowly flaked off the disc rendering them useless after about 6 months in the car cd holder. TY,Ritek,MCC discs were all fine(some are 3 yrs old) and they all sit in the same CD case.

PostPosted: Thu Apr 01, 2004 10:53 pm
by cfitz
wicked1 wrote:I have had memorex CMC discs and the top layer slowly flaked off the disc rendering them useless after about 6 months in the car cd holder. TY,Ritek,MCC discs were all fine(some are 3 yrs old) and they all sit in the same CD case.

I've had trouble with CMC longevity as well:

http://www.cdrlabs.com/phpBB/viewtopic. ... 1074#71074

(And that was with the "good" Imation branded CMC... :roll: )

cfitz

Confirmation

PostPosted: Sat Apr 03, 2004 8:01 pm
by goodwill
I had a batch of TDK branded CMC disks.
They definatelly suck.

Problems range from screwing up a burn to longevity. It seems like the longest most of them lasted is 5-7 month.

Any one wants a batch of shiny TDK coasters??? Good for putting drinks on, making disco balls and frisbey's :)

W.

PostPosted: Sun Apr 11, 2004 5:07 pm
by jase
I have to say I can't remember a CMC disc ever actually fail on me, but they do tend to be temperamental when it comes to reading them back on other devices. The later, higher speed ones are better than the older ones (some of which were truly, truly awful) but still not great.

Longevity is *definitely* an issue. I've had disc-rot on some discs after only a couple of weeks. Princo give me better longevity than CMC, and always have done.

PostPosted: Mon Apr 12, 2004 4:28 pm
by unclebud
i want to make a disco ball out of cd scraps! cool idea, thanks

PostPosted: Thu Apr 29, 2004 1:43 am
by pika2000
My experience with CMC:
1. With a good burner, such as plextor, they're okay. You will get decent burn quality, with relatively low/medium C1 errors.
2. In using CMC for Audio CD, I always have problems (skipping, etc). The only way I can use CMC as an audio CD perfectly is with Yamaha's Audio master quality recording.

Recommendation: If you find them dirt cheap, then get them. If not, Fuji's TY is much better for your money. If you do have them cheap, they are useful for giving to/sharing with friends.

Due to the mass availability of CMC media from various manufactures, it's hard to avoid them. However, I still use my TY Fujis for actual data backup.

PostPosted: Thu Apr 29, 2004 11:50 am
by Centrilium
The newer batches of CMC cdrs are indeed quite good.Yup CMC use to have a very bad reputation in the early days but the new rated 48X-52X cdrs are good.They work extremely well with LiteON burners.The region where i come from which is east asia,brands like Imation,Egen,Melody Group are all very common where all of them are made by CMC.I have no problem playing these cdrs in my audio player unlike the Prodiscs and Maxells.

PostPosted: Thu Apr 29, 2004 12:18 pm
by dolphinius_rex
hehe, Don't count Melody in with CMC. Just because they carry the CMC media code, and are made in a CMC plant, the Melody group actually rents time with CMC, and has their own way of making the discs. So you are more likely to get consistant results.

I'm not saying Melody is good, I have never used it. I'm just saying it is much more likely to be consistant. And Consistancy is *NOT* something I've seen from CMC, even in the new 48x and 52x media.

PostPosted: Fri Apr 30, 2004 1:54 pm
by Centrilium
Really true just don't go and use the CMCs for backing up really important stuffs.It's great if you're planning to distribute your recordings or stuffs similar.
Avoid those from Philips though,really bad quality especially at the ending tracks.

PostPosted: Thu May 06, 2004 9:12 am
by wuub
I'm not saying Melody is good, I have never used it. I'm just saying it is much more likely to be consistant. And Consistancy is *NOT* something I've seen from CMC, even in the new 48x and 52x media.


I picked up a spindle of their Arra branded discs, and found them to be otherwise. Whilst most burnt fine at 52x, some developed read errors after a month. And, quite a few of the discs in the pack were physically damaged, they had actual scratch marks/holes right through the reflective layer (could have made a good old fashioned pin-hole camera.