Page 1 of 1

vendor specific error triple ???!!!!

PostPosted: Wed Jun 15, 2005 12:41 pm
by wildies
Thats error is coming to me up lately while trying to burn my CD-R media (Sony, CMC, Prodisc ) with my CD-RW Aopen 32x12x48x and i am using Prassi ONES to Burn , it Sometimes dosent happenes when i turn down the burning speed to 24x or 16x ..

whats happenes is thats the programe cache the data then when it begain the burning proccess it just stops and give me thats error (vendor specific error triple) ..

and nowdays when i burn them with lower speeds , after finishing the burn , the cd is still blank??!!!
so is my burner died or what??

can anyone tell whats happening here...

PostPosted: Wed Jun 15, 2005 2:59 pm
by dodecahedron
does the drive read CDs OK?

try using different burning software.
if you don't have another commercial program, you can use burnatonce (http://www.burnatonce.com).

try using different media. can you get Taiyo Yuden ?

check this topic http://www.cdrlabs.com/phpBB/viewtopic.php?t=6005 to find good media for your drive.

maybe try upgrading firmware ?

PostPosted: Wed Jun 15, 2005 4:41 pm
by wildies
it reads cd with no problemes..
and i used Nero and Deepburner and Sonic Record Now , and all not wokring...

i used TDK and Samsung and Sony...and all give the same problemes...

and i am using the latest firmware...

PostPosted: Wed Jun 15, 2005 4:55 pm
by dodecahedron
hmm..
i would try using the drive in another computer if you can.
other than that i think the drive might be broken.
try contacting AOpen support see what they have to say about it.

Re: vendor specific error triple ???!!!!

PostPosted: Thu Oct 16, 2008 11:30 am
by fburcul
I have the same problem/error, but only when I try to burn data DVD, I have successfully burned data and audio CD.

I'm using Prassi ONES software, I had pioneer DVR-215D sata drive which I changed for Pioneer DVR-216D sata drive both gave same error.

I even tried to flash DVR-215D different versions of firmware and kernel, but nothing worked.

I also tried to change DVD type Verbatim, Traxdata, Imation and none of them work on either 215 or 216 while on the older Pioneer burner i think 112 which is ATA drive ONES works perfectly.

After all tried I installed cdburner xp pro to try to burn with it and it worked, it now burns all types.

Is there any solution to this error, because ones is much better than cdburner xp pro.

Re: vendor specific error triple ???!!!!

PostPosted: Fri Nov 28, 2008 4:08 pm
by SithTracy
ONES is no longer developed...