Page 1 of 1

I nEed Urgent Help

PostPosted: Wed Feb 01, 2006 3:18 pm
by Arsalan
Can some one plz plz help me!?
I need urgent help
I M USING BENQ 4816 firmware updated and is E.09
when ever i try to burn a CDR it gives follwing errorS:
Code: Select all
    SCSI/IDE Error
    ATAPI CD-R/RW 48X16\H0 T1
    Could Not perform fixation
    current program area empty
    invalid write state


My Log file
Arsalan Mahmood
Microsoft

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 12/10/01 5:32:56 PM
ahead WinASPI: File 'C:\PROGRAM FILES\NERO\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.15
Recorder: <ATAPI CD-R/RW 48X16> Version: 9.EK - HA 0 TA 1 - 6.3.1.15
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-R/RW 48X16 >Version: 9.EK - HA 0 TA 1 - 6.3.1.15
Adapter driver: <ESDI_506> HA 0
ATAPI CD-R/RW 48X16 (Target 1, F:): Autoinsert Off, DMA Off, Disconnect Off, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130524kB)
Free physical memory: 22MB (23396kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.1.2006
CD-ROM (ISO)
12:34:41 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:34:41 PM #2 Phase 87 File dlgbrnst.cpp, Line 1845
Seamless Link activated

12:34:41 PM #3 Text 0 File Reader.cpp, Line 118
Reader running

12:34:41 PM #4 Text 0 File Writer.cpp, Line 124
Writer ATAPI CD-R/RW 48X16 running

12:34:41 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:34:41 PM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media

12:34:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 327574 ( 72:49.49)

12:34:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

12:34:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: ATAPI CD-R/RW 48X16;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

12:34:55 PM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

12:34:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 8461 (8461) = #8461/1:52.61
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8459 blocks [ATAPI CD-R/RW 48X16 ]
--------------------------------------------------------------

12:34:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [ATAPI CD-R/RW 48X16 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 6 to 6:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 17635328, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
318964 | lead-in | 0 | 0x00 | 0x41
318964 | 6 | 0 | 0x00 | 0x41
319114 | 6 | 1 | 0x00 | 0x41
327575 | lead-out | 1 | 0x00 | 0x41

12:34:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 6. Length: 8461 -> 8459.

12:34:58 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

12:34:58 PM #15 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

12:34:58 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

12:34:58 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 40x (6,000 KB/s)

12:34:58 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #319114

12:34:58 PM #19 Text 0 File Mmc.cpp, Line 20239
Set BUFE: Seamless Link -> ON

12:36:21 PM #20 SCSI -1093 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0xFF
CDB Data: 0x2A 0x00 0x00 0x04 0xF0 0xCA 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0xFF

12:36:21 PM #21 CDR -1093 File Writer.cpp, Line 304
No seek complete

12:36:21 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:36:21 PM #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
ATAPI CD-R/RW 48X16\H0 T1

12:36:21 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

12:36:21 PM #25 Text 0 File Mmc.cpp, Line 15064
<ATAPI CD-R/RW 48X16 > start Close Session

12:36:21 PM #26 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

12:36:21 PM #27 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error

12:36:21 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

12:36:21 PM #29 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

12:36:21 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

12:36:21 PM #31 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 40x (6,000 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.2 (031), size=51354 bytes, created 6/21/97 3:00:00 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:


PostPosted: Fri Feb 03, 2006 11:57 am
by Scour
Did you try different media, different writespeeds?

PostPosted: Sat Feb 04, 2006 7:10 am
by Arsalan
Scour wrote:Did you try different media, different writespeeds?

yeah man i have tried different media also CDRW's
on almost all CDR's nero gave me the error which i have written before.
and sometimes i might remind it again "that sometimes" only and only 1 of 20 CDRW is burnt without any error but after the completion of burn process when i open it NO FILES THERE!!!!!
ALAS!!!!!
I NEEEED HELP

PostPosted: Sat Feb 04, 2006 8:27 am
by Ian
It looks like you're burning a multisession disc. What happens if you don't?

PostPosted: Sat Feb 04, 2006 9:50 am
by Arsalan
Ian wrote:It looks like you're burning a multisession disc. What happens if you don't?


i have tried both multiseesion and NO MULTIsEESION too
also tried different speed like from 20X to 48X
but nothing works :roll:

PostPosted: Sat Feb 04, 2006 12:55 pm
by dodecahedron
hello Arsalan, welcome to CDRLabs.


a few things.

1. from the log: "ATAPI CD-R/RW 48X16 (Target 1, F: Autoinsert Off, DMA Off, Disconnect Off, SyncDataXfer Off"

turn DMA on !!!!!

2. from the log: "ISO Level : 1 (Max. of 11 = 8 + 3 char) "
change it to ISO Level 2.

3. from the log: "Burning mode : TAO"
burn in DAO (Disc-at-Once) moce.

4. burn No Multisession, CDR.
from the log: "CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd."
plasmon isn't such great media. see if you can find better media.
Taiyo Yuden, Verbatim.

PostPosted: Sat Feb 04, 2006 1:44 pm
by Arsalan
dodecahedron wrote:hello Arsalan, welcome to CDRLabs.


a few things.

1. from the log: "ATAPI CD-R/RW 48X16 (Target 1, F: Autoinsert Off, DMA Off, Disconnect Off, SyncDataXfer Off"

turn DMA on !!!!!

2. from the log: "ISO Level : 1 (Max. of 11 = 8 + 3 char) "
change it to ISO Level 2.

3. from the log: "Burning mode : TAO"
burn in DAO (Disc-at-Once) moce.

4. burn No Multisession, CDR.
from the log: "CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd."
plasmon isn't such great media. see if you can find better media.
Taiyo Yuden, Verbatim.


The log file that you are seeing is of the time when i changed the system configurations and then tried to burn CD , which also didnt work at all.
well i wanna ask some thing that should i enable DMA for both CD and HardDrive too.
and one thing that i also noticed is that the data is saved as tracks in cdRs although it's saved in a corrupted form ,this happened because CDR was not burnt properly.
and whenever after putting that CDR back into CDRW i can see it's tracks in NERO some times it is readable by nero and smoetimes not.but i cant open these CDR's in explorer.
does this mean that my CDRW is alright?
I have also tried changing media and used MAXELL 52X which also did nto work, and i burnt a BENQ CDRW at 16X which burnt nicely with no probs.

and also tried another CDRW of BENQ ,which said that "BURN PROCESS COMPLTED SUCCESSFULLY" but when i opened it in explorer it was blank.

PostPosted: Sat Feb 04, 2006 2:48 pm
by Arsalan
the following errors are of given factors
so can any body now figure out what are these errors all about.
command sequence error|error of CDR
session fixation error|error of CDR
could not perfrom fixation | transfer error
SCSI/IDE Error | error of CDR
ATAPI CD-R/RW 48X16\H0 T1 | error of CDR
Could Not perform fixation | transfer error
current program area empty | error of CDR
invalid write state | error of CDR