Page 1 of 1

LG GCE 8320B (Does it support DMA?)

PostPosted: Thu Jan 01, 1970 2:03 am
by kingaddi
I have been reading alot of post regarding if the LG GCE 8320B does support DMA mode. I tried to enable this on my computer but it still read that it's running in PIO mode.

Now I also read a review on this site that this model does not support UDMA 33 therefore all the post I'm been reading seem a bit confusing.

PostPosted: Thu Jan 01, 1970 2:03 am
by Ian
DMA and UDMA are NOT the same thing. Read this FAQ:

http://www.cdrlabs.com/phpBB/viewtopic.php?t=3032

You can still enable DMA for your PIO Mode 4 drive.

LG, GCE HL-DT-ST 8320B > GCE HL-DT-ST 8400B UDMA33-MT-Rai

PostPosted: Fri Jun 20, 2003 9:31 pm
by Hori_Porks
Yes the LG GCE-8320B does support DMA (Direct Memory Access).
PIO Mode 4 (Multi Word DMA).

I overclocked my LG GCE-8320B to GCE-8400B (Using IBM's Firmware) to Enable UDMA 33 & MT-Rainer Support.

In Brief, the steps on how i went about it below
(From Info gathered from the Forum @ CDFreaks.com)

LG, GCE HL-DT-ST 8320B > GCE HL-DT-ST 8400B UDMA33-MT-Rainer Support

Original:
GCE HL-DT-ST 8320B
32x 10x 40x
2MB Buffer
LG FW: 1.04
PIO Mode 4- Multi Word DMA - No MT-Rainer Support

Flashed to:
GCE HL-DT-ST 8400B
40x 12x 40x
2MB Buffer
LG FW: 1.04
PIO Mode 4 - Multi Word DMA - No MT-Rainer Support

Flashed to: with the "IBM FW: 1.12" Result Below:
HL-DT-ST 8400B
40x 12x 40x
IBM FW: 1.12
UDMA 33 - MT-Rainer Support

Pro's:
- UDMA33
- Z-CAV --> P-CAV
- Mount Rainier support
Con:
- Read LED not work (when reading,write LED working instead)

Worked Fine for me.

IBM 1.12 Firmware Link:
ftp://ftp.pc.ibm.com/pub/pccbbs/int...ion/74p4782.exe

IBM 1.12 Firmware Readme.TXT:
ftp://ftp.pc.ibm.com/pub/pccbbs/int...ion/74p4782.txt

Information on the IBM Firmware was care of "Wiboon" @ CDFreaks.com.

Links for more info:

http://club.cdfreaks.com/showthread.php ... genumber=9

http://club.cdfreaks.com/showthread.php ... enumber=10

Hori_Porks
New Zealand