CDRLabs.com

having problems getting Recordnow DX 4.56 to rcognize my Pioneer DVR-108 Drives

Would like to keep older Ver. Recordnow because of Job list ability for more than 1 drive

Running
XP
1.18 firmware on drives

Is this a firmware problem????????

been trying different pxdrv.dll files
no luck with that
Anyone else having probelms like mine????????
Also tried Recordnow MAX 4.5

whelm wrote:Is this a firmware problem????????

No. The likely problem is that RecordNow DX 4.56 is just too old. The DVR-108 came out long after RecordNow DX 4.56 was released, so support for the DVR-108 is not built into the program.

Check here and you will see that the DVR-108 is not supported by RecordNow Max.

You will probably have to upgrade to a newer version of burning software, but you can try to see if you can get an updated version of just the burning engine:

http://support.sonic.com/dwnld/engine.a ... =recordnow

They have an engine update from August 2004,but it is only listed for 4.6 and above, so I don't know whether or not it will work with your 4.56.

cfitz

whelm

I hope this helps you. It's dated yesterday.

http://www.dvd-recordable.org/Article1793.phtml

http://www.dvd-recordable.org/Reviews+index-req-showcontent-id-137.phtml

And maybe this will too.

http://patches.sonic.com/downloads/engine/pxEngine507.exe

Thank you i will try

whelm wrote:Thank you i will try

The other links I posted should work with RecordNow Max 4.5 This link might help you with your RecordNow DX 4.56 because it's a update to RecordNow DX 4.61. I don't know if having a Sony drive is a requirement for the upgrade.

You should also look on sonics website for a pxengine update once you have (or if it lets you) updated to 4.61.

Good Luck!

http://www.sonicjapan.co.jp/oem/sony/rndx45/download_en.html

http://www.sonicjapan.co.jp/download/Veritas/DX46/DX46sony/rndx461u_sony_en.exe