Page 1 of 1

LG GCE-8400b

PostPosted: Thu Jan 01, 1970 1:32 am
by mcaf
i have a LG GCE-8400b with winxp.
but easy cd creator basic 5.1 not recognize the cd-rw

help me

PostPosted: Thu Jan 01, 1970 1:32 am
by Ian
Are you using the software that came with the drive?

It worked fine for me.

re:

PostPosted: Thu Jan 01, 1970 1:32 am
by mcaf
do you the right release of sw????

PostPosted: Thu Jan 01, 1970 1:32 am
by Ian
I don't understand that question.

re:

PostPosted: Thu Jan 01, 1970 1:32 am
by mcaf
sorry
do you know the right release of sw easy cd creator????

PostPosted: Thu Jan 01, 1970 1:32 am
by Ian
I'll have to check when I get home. I think it was 5.1 build 64 or something, but I'm not 100%.

I think you will need to use the bundled software if you want to use Easy CD Creator. Using the Basic version that came with another drive might not work.

PostPosted: Thu Jan 01, 1970 1:32 am
by mcaf
i find this is recet rewies of the LG GCE-8400B 40/12/40 CD-RW

Like the other 40x writers I've looked at over the past few months, LG's new GCE-8400B was very easy to install. If you've installed an IDE CD-ROM or CD-RW drive before you won't have any problems. I took the drive out of the box, left the jumper set to master and installed it on the secondary IDE chain by connecting the IDE cable and power connector. When I turned on the computer the BIOS detected it as a drive supporting PIO Mode 4. After making sure that the DMA check box was checked in the device manager, I was ready to go.

Even though the GCE-8400B doesn't support UDMA 33, it is still important to enable DMA in your OS. Enabling DMA will help you get the best performance from your drive.


---------------------------------------
WHAT DO YOU THINK???
THANKS
CIAO

it's ok

PostPosted: Thu Jan 01, 1970 1:34 am
by mcaf
it's all ok with
Update Easy CD Creator 5.xx Basic to version 5.1.1

and

If Easy CD Creator does not recognize your CD-Burner after rebooting also download and install the drive update by clicking here. (DriveUp_v511d.exe - 223 KB) - 4/02


http://www.roxio.com/en/support/roxio_s ... _updt.html

Bye Marco

same problem?

PostPosted: Tue Nov 05, 2002 5:19 am
by giggock
i got same problem with the software that come with the package.it can't recognize and now still can't remember drive.i had load nero or whatever.my drive still doesn't work. when i load roxio everytime,it show error seemlike software not complete100%.so, now i broke it to garbage already.what can i do now. and how i can get a complete software.
help me please.