CDRLabs.com

I just updated Nero to 6601 and I noticed that when I use Nerovision 3, it now fails each time I try to burn a project. It worked fine in the previous version. I had to restore my pc back to the previous version of NeroVision in order to be able to burn. Below is the error message. I also noticed in the new version it is defaulting to transcode and burn at the same time. I don't think it did that in my previous version. Any ideas? WinXP, 2.4ghz, 1gig ram, 200 gig HD. Thanks. Mickey


[22:15:26] DVDEngine JLMS XJ-HD166S D: CDRom0
[22:15:26] DVDEngine PLEXTOR DVDR PX-708A E: CDRom1
[22:15:26] DVDEngine =======================
[22:15:26] DVDEngine AutoRun : 1
[22:15:26] DVDEngine Excluded drive IDs:
[22:15:26] DVDEngine WriteBufferSize: 83886080 (0) Byte
[22:15:26] DVDEngine ShowDrvBufStat : 0
[22:15:26] DVDEngine BUFE : 0
[22:15:26] DVDEngine Physical memory : 1022MB (1047276kB)
[22:15:26] DVDEngine Free physical memory: 252MB (258824kB)
[22:15:26] DVDEngine Memory in use : 75 %
[22:15:26] DVDEngine Uncached PFiles: 0x0
[22:15:26] DVDEngine Use Static Write Speed Table: 0
[22:15:26] DVDEngine Use Inquiry : 1
[22:15:26] DVDEngine Global Bus Type: default (0)
[22:15:26] DVDEngine Check supported media : Disabled (0)
[22:15:26] DVDEngine 27.10.2004
[22:15:26] DVDEngine NeroAPI
[22:15:26] DVDEngine 10:14:42 PM #1 Text 0 File DlgWaitCD.cpp, Line 256
[22:15:26] DVDEngine Last possible write address on media: 2298495 (510:46.45, 4489MB)
[22:15:26] DVDEngine Last address to be written: -1 ( 0:00.-1, 0MB)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:42 PM #2 Text 0 File DlgWaitCD.cpp, Line 268
[22:15:26] DVDEngine Write in overburning mode: NO (enabled: CD)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:42 PM #3 Text 0 File DlgWaitCD.cpp, Line 2309
[22:15:26] DVDEngine Recorder: PLEXTOR DVDR PX-708A, Media type: DVD-R
[22:15:26] DVDEngine Disc Manufacturer: Prodis - cS03
[22:15:26] DVDEngine Disc Application Code: 64, Disc Physical Code: 193
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:42 PM #4 Text 0 File DlgWaitCD.cpp, Line 430
[22:15:26] DVDEngine >>> Protocol of DlgWaitCD activities: <<<
[22:15:26] DVDEngine =========================================
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:44 PM #5 Text 0 File DVDR.cpp, Line 2027
[22:15:26] DVDEngine Recording mode: Sequential Recording Mode for Multisession
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:44 PM #6 Text 0 File Mmc.cpp, Line 20673
[22:15:26] DVDEngine Set BUFE: BURN-Proof -> ON
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:44 PM #7 Text 0 File DVDR.cpp, Line 2168
[22:15:26] DVDEngine Start write address at LBA 0
[22:15:26] DVDEngine DVD high compatibility mode: No
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:45 PM #8 Text 0 File Cdrdrv.cpp, Line 8281
[22:15:26] DVDEngine ---- DVD Structure: Physical Format Information (00h) ----
[22:15:26] DVDEngine Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[22:15:26] DVDEngine Book Type: DVD-R (2), Part Version: 5
[22:15:26] DVDEngine Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
[22:15:26] DVDEngine Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
[22:15:26] DVDEngine Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
[22:15:26] DVDEngine Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
[22:15:26] DVDEngine End Physical Sector Number of Data Area: 0 h
[22:15:26] DVDEngine End Sector Number in Layer 0: 0 h
[22:15:26] DVDEngine Data in Burst Cutting Area (BCA) does not exist
[22:15:26] DVDEngine Start sector number of the current Border-Out: 0 h
[22:15:26] DVDEngine Start sector number of the next Border-In: 0 h
[22:15:26] DVDEngine Media Specific [16..63]:
[22:15:26] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[22:15:26] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[22:15:26] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:45 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 918
[22:15:26] DVDEngine Can only write at 2x (2,770 KB/s) instead of 2.4x (3,324 KB/s) to current disc.
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:46 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 989
[22:15:26] DVDEngine Estimated filesystem size: 608
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:46 PM #11 Phase 36 File APIProgress.cpp, Line 276
[22:15:26] DVDEngine Burn process started at 2x (2,770 KB/s)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:46 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1646
[22:15:26] DVDEngine Buffering files started
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:46 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1367
[22:15:26] DVDEngine Buffering VIDEO_TS.VOB
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2464
[22:15:26] DVDEngine Finished buffering file VIDEO_TS.VOB of size 618496 bytes (302 sectors)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2523
[22:15:26] DVDEngine Finished writing file VIDEO_TS.VOB of size 618496 bytes (302 sectors)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2536
[22:15:26] DVDEngine Buffering files finished successfully
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 663
[22:15:26] DVDEngine Reserved fragment at 0. Length: 992
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1829
[22:15:26] DVDEngine Reserved start fragment at 0
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 663
[22:15:26] DVDEngine Reserved fragment at 992. Length: 32
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:14:48 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1361
[22:15:26] DVDEngine Writing VTS_01_1.VOB at sector 1024
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:15 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2523
[22:15:26] DVDEngine Finished writing file VTS_01_1.VOB of size 9695232 bytes (4734 sectors)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:15 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1361
[22:15:26] DVDEngine Writing VTS_01_0.BUP at sector 5758
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:15 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2523
[22:15:26] DVDEngine Finished writing file VTS_01_0.BUP of size 22528 bytes (11 sectors)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:16 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1361
[22:15:26] DVDEngine Writing VTS_01_0.IFO at sector 992
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:16 PM #25 SCSI -1064 File Cdrdrv.cpp, Line 1432
[22:15:26] DVDEngine SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x13525000
[22:15:26] DVDEngine Status: 0x04 (0x01, SCSI_ERR)
[22:15:26] DVDEngine HA-Status 0x00 (0x00, OK)
[22:15:26] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[22:15:26] DVDEngine Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[22:15:26] DVDEngine Sense Code: 0x21
[22:15:26] DVDEngine Sense Qual: 0x02
[22:15:26] DVDEngine CDB Data: 0x2A 0x00 0x00 0x00 0x03 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
[22:15:26] DVDEngine Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
[22:15:26] DVDEngine 0x00 0x00 0x00 0x00 0x21 0x02
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:21 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2503
[22:15:26] DVDEngine Successfully released fragment at 992
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:21 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2523
[22:15:26] DVDEngine Finished writing file VTS_01_0.IFO of size 22528 bytes (11 sectors)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:25 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 638
[22:15:26] DVDEngine Successfully released fragment at 1024
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:25 PM #29 SCSI -1023 File Cdrdrv.cpp, Line 1178
[22:15:26] DVDEngine SCSI Exec, HA 3, TA 1, LUN 0
[22:15:26] DVDEngine Status: 0x04 (0x01, SCSI_ERR)
[22:15:26] DVDEngine HA-Status 0x00 (0x00, OK)
[22:15:26] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[22:15:26] DVDEngine Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[22:15:26] DVDEngine Sense Code: 0x2C
[22:15:26] DVDEngine Sense Qual: 0x00
[22:15:26] DVDEngine CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
[22:15:26] DVDEngine Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
[22:15:26] DVDEngine 0x00 0x00 0x00 0x00 0x2C 0x00
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:25 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 667
[22:15:26] DVDEngine Error reserving fragment (5792)
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:26 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 3488
[22:15:26] DVDEngine Disc info:
[22:15:26] DVDEngine Partitions: 2
[22:15:26] DVDEngine #0: Start: 0, Size: 976
[22:15:26] DVDEngine #1: Start: 992, Size: 16
[22:15:26] DVDEngine
[22:15:26] DVDEngine 10:15:26 PM #32 Phase 179 File APIProgress.cpp, Line 276
[22:15:26] DVDEngine Writing file to disc failed
[22:15:26] DVDEngine
[22:15:26] DVDEngine Existing drivers:
[22:15:26] DVDEngine File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
[22:15:26] DVDEngine File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 1/24/2004 12:56:48 PM
[22:15:26] DVDEngine File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/26/2004 4:15:19 PM (Prassi/Veritas driver for win 2K)
[22:15:26] DVDEngine Registry Keys:
[22:15:26] DVDEngine HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[22:15:26] DVDEngine _Xcept (): Signalling Exception: 129 NeroBAOOpenFile() returned error condition _BAOContext::OpenFile()
[22:15:26] DVDEngine ########################################################################################
[22:15:26] DVDEngine ERROR
[22:15:26] DVDEngine cause: 129 (neroapi_call_failed)
[22:15:26] DVDEngine source: NeroBAOOpenFile() returned error condition
[22:15:26] DVDEngine description: _BAOContext::OpenFile()
[22:15:26] DVDEngine ########################################################################################
[22:15:26] DVDEngine ****END: Create - VTSTT_VOBS#2
[22:15:26] DVDEngine **END: _DVDVideo - Create
[22:15:26] DVDEngine DVDENGINE exception caught.
[22:15:26] DVDEngine **BEGIN: DVDSessionBase - Clear
[22:15:26] DVDEngine **END: DVDSessionBase - Clear
[22:15:26] DVDEngine END: IDVDVideoSessionImpl - CreateDisc
[22:15:31] NeroAPI Burn process failed at 2x (2,770 KB/s)
[22:15:31] DVDEngine BEGIN: IDVDVideoSessionImpl - EndDiscAccess
[22:15:31] DVDEngine ...flags=0
[22:15:31] DVDEngine **BEGIN: _MediaAccess::Release ()
[22:15:31] DVDEngine ****BEGIN: _MediaAccess::~_MediaAccess ()
[22:15:31] DVDEngine ****END: _MediaAccess::~_MediaAccess ()
[22:15:31] DVDEngine **END: _MediaAccess::Release ()
[22:15:31] DVDEngine END: IDVDVideoSessionImpl - EndDiscAccess
[22:15:31] DVDEngine BEGIN: DVDSessionBase - RegisterCallback
[22:15:31] DVDEngine ...Session callback unregistered...
[22:15:31] DVDEngine END: DVDSessionBase - RegisterCallback
[22:15:32] GCHW Node added: Microsoft Kernel Wave Audio Mixer

I am also having trouble with the new version also. Mine locks up during transcoding, and I noticed that the abort button is greyed out. I had to revert back to a earlier version to get things working again. This is the first time I have ever had a problem with this nero vision express.

mickeymcc wrote:I just updated Nero to 6601 and I noticed that when I use Nerovision 3, it now fails each time I try to burn a project. It worked fine in the previous version. I had to restore my pc back to the previous version of NeroVision in order to be able to burn. Below is the error message. I also noticed in the new version it is defaulting to transcode and burn at the same time. I don't think it did that in my previous version. Any ideas? WinXP, 2.4ghz, 1gig ram, 200 gig HD. Thanks. Mickey


[22:15:26] DVDEngine ########################################################################################
[22:15:26] DVDEngine ERROR
[22:15:26] DVDEngine cause: 129 (neroapi_call_failed)
[22:15:26] DVDEngine source: NeroBAOOpenFile() returned error condition
[22:15:26] DVDEngine description: _BAOContext::OpenFile()
[22:15:26] DVDEngine ########################################################################################
[

Hi Mickey,

I notice your log file indicates that there was a problem calling to our NeroAPI. And even prior to that it had trouble creating some IFO files. I would recommend a clean uninstall and then a fresh download and install to see if there was a problem with the download or install process. Just in case.

Regards

Craig