Page 1 of 1

Burn fail

PostPosted: Mon Jan 10, 2005 9:03 pm
by darrickday
I cannot seem to find a solution to make Nero Burning Rom work. The following error report shows the most common problem at Cdrdrv.cpp line 1430. Any help or direction is greatly appreciated.



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TEAC DVD+RW DV-W58E> Version: D.0C - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC DVD+RW DV-W58E atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 D: CDRom0
TEAC DVD+RW DV-W58E E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522168kB)
Free physical memory: 167MB (171236kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.1.2005
NeroAPI
9:59:37 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

9:59:37 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

9:59:37 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

9:59:37 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

9:59:37 PM #5 Text 0 File Writer.cpp, Line 122
Writer TEAC DVD+RW DV-W58E running

9:59:37 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:59:37 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

9:59:38 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

9:59:38 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media

10:00:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1134185 (252:02.35, 2215MB)

10:00:15 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO

10:00:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: TEAC DVD+RW DV-W58E, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3

10:00:15 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

10:00:15 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1134336 (1134336) = #1134336/252:4.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1134336 blocks [TEAC DVD+RW DV-W58E]
--------------------------------------------------------------

10:00:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [TEAC DVD+RW DV-W58E] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2323120128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1134336 | lead-out | 1 | 0x41 | 0x00

10:00:15 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

10:00:15 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

10:00:15 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

10:00:15 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

10:00:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:00:15 PM #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

10:00:15 PM #22 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes

10:00:54 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00BE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

10:00:54 PM #24 CDR -1106 File Writer.cpp, Line 311
Power calibration error

10:00:54 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:00:54 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:01:42 PM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

10:05:12 PM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

10:05:12 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

10:05:12 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

10:05:12 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

PostPosted: Mon Jan 10, 2005 10:26 pm
by vio_man
Please edit your post. You're showing your serial number to everybody :lol:

PostPosted: Wed Jan 12, 2005 4:53 pm
by CCampbell
You are getting a 'Power Calibration' error message. This is a well known error message on this and other forums.

If you do a search on this topic, you will find an extensive list of possible causes and solutions.

Regards,

Craig