Always with the same error....
Posted: Mon Feb 21, 2005 4:01 pm
I've tried everything. DMA is on, ASPI is working correctly, I've uninstalled, cleaned and reinstalled. I've uininstalled NERO, uninstalled every other program that might access the bruning drive, cleaned, reinstalled NERO only and still no dice. I can (if it's installed) burn music CD's just fine with WinAmp and most functions regarding basic storage using Windows XP to drop and burn files work fine - but every thing I try to burn with Nero craps out and gives me the same error:
That is taken from the entire error log which I'll paste below.
I'm running WinXP Pro SP2 on an AMD Athlon XP 1800+ with 1 GB ram
Drive is an HP DVD Writer 200j driver version 5.1.2600.2180 (xpsp2_rtm.040803-2158) DMA is ON
Any clues??
Error Log:
1:41:58 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1433
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x74 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x0C 0x00
1:41:58 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
That is taken from the entire error log which I'll paste below.
I'm running WinXP Pro SP2 on an AMD Athlon XP 1800+ with 1 GB ram
Drive is an HP DVD Writer 200j driver version 5.1.2600.2180 (xpsp2_rtm.040803-2158) DMA is ON
Any clues??
Error Log:
/---serial # removed ---/
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.7
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.6.0.7
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-ROM MAX 58X >Version: 1.32 - HA 1 TA 1 - 6.6.0.7
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-ROM MAX 58X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j D: CDRom0
ATAPI CD-ROM MAX 58X E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 483MB (494896kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.2.2005
CD-ROM (Boot)
1:37:41 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
1:37:41 PM #2 Text 0 File Burncd.cpp, Line 2868
HP DVD Writer 200j
Buffer underrun protection activated
1:37:41 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
1:37:41 PM #4 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
1:37:41 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3289
First writeable address = 0 (0x00000000)
1:37:41 PM #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
1:37:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 258
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 299286 ( 66:32.36)
1:37:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Write in overburning mode: NO (enabled: CD)
1:37:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HP DVD Writer 200j;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
1:37:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 432
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:37:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 299287 (299287) = #299287/66:30.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299287 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
1:37:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613246976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
299287 | lead-out | 1 | 0x41 | 0x00
1:37:42 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:38:28 PM #14 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
1:38:28 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:38:28 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1,800 KB/s)
1:38:28 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:38:28 PM #18 Text 0 File Mmc.cpp, Line 16403
StartDAO : CD-Text - Off
1:38:28 PM #19 Text 0 File Mmc.cpp, Line 21156
Set BUFE: Buffer underrun protection -> ON
1:38:28 PM #20 Text 0 File Mmc.cpp, Line 16690
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 20 25
1:41:58 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1433
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x74 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x0C 0x00
1:41:58 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
1:41:59 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:41:59 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:41:59 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (1,800 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 4:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)