Page 1 of 1
the wrong format
Posted:
Wed Sep 20, 2006 4:37 pm
by coonsanders
hi
maybe its in the format for the nero 6 soundtrax.i put line in in the audio
in put line but it might be wrong.any ideas?
coonsanders
the wrong format
Posted:
Wed Sep 20, 2006 6:39 pm
by margrave
What is in the wrong format ? You need to describe your problem more clearly to get any help...
the wrong format
Posted:
Wed Sep 20, 2006 6:46 pm
by coonsanders
hi
i making cds from lps and 78s.when using the nero 6 soundtrax should
i use line in,wave,auxililiry,or s/pif formats.line in has worked ok so far
but ive been haveing a problem with the soundtrax so i thought another
format would be better.thanks
coonsanders
Posted:
Wed Sep 20, 2006 10:17 pm
by hoxlund
line in/aux in is the same thing, just different port
same 1/8 jack input into computer
spdif should give you better results, right?
the wrong format
Posted:
Wed Sep 20, 2006 10:45 pm
by coonsanders
hi
im not sure what s/pif in is used 4?what is it used 4??
coonsanders
Posted:
Thu Sep 21, 2006 1:37 pm
by Justin42
Does your turntable have an RIAA amplifier built in? If not, you MUST have an RIAA amp in line, and ground your turntable, to get acceptable results. Radio Shack sells low-end ones for around $30.
Otherwise, check your turntable manual to see if it has an RIAA amp and if you can turn it on and off. Be sure it is on.
Line in is the ONLY correct option.
SPDIF in is a digital format. you will never find a turntable that will support it.