CDRLabs.com

I have the same problem for both nero 6 and 7.
When I copy to a dvd-r or dvd+r the process stops when writing the lead out. It says (I don’t know if the translation is accurate)

Impossible the retrieval from TOC
Impossible to execute the end of disk at once

Can anybody help?
Thank you

It would be helpful to know the burner you are using and the type of media... My gut tells me your using some sub par media... But you have not provided enough detail.

My burner is Pioneer DVD-RW DVR-107D. The driver is the latest one.
The dvds that I have used are: HP dvd+r & dvd-r and memorex dvd-r.
I didn't have such problems in the past. I haven't changed any hardware in between but I have installed many programs and between them nero 7.
I stuck in 100% also with burn4free.

Try to rip your disc to an ISO and then burn it with IMG Burn.
Let us know your results.

I bet its media. HP dvd+r & dvd-r and memorex dvd-r usually aren't the best discs. Most likely CMC or Ritek.

Wesociety wrote:Try to rip your disc to an ISO and then burn it with IMG Burn.
Let us know your results.

I followed the procedure. But again ...

Here is the log:
I 18:30:55 Writing Image... (LBA: 0 - 2259775)
I 18:44:49 Synchronising Cache...
I 18:44:50 Closing Track...
I 18:44:59 Finalising Disc...
W 18:45:03 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Unknown (Internal Target Failure) (0x44, 0xD6)
E 18:45:16 Finalise Disc Failed! - Reason: Unable to Recover TOC
I 18:45:16 Finalising Disc (Last Attempt!)...
E 18:45:16 Finalise Disc Failed! - Reason: Unable to Recover TOC
E 18:45:16 Failed to Write Image!
E 18:45:16 Operation Failed! - Duration: 00:15:02
I 18:45:16 Average Write Rate: 5.419 KB/s (3.9x) - Maximum Write Rate: 5.616 KB/s (4.1x)

I will try with othe dvd media!

Ok,
it was the ........ dvd media.
I used intenso and the problem is over!
Thank you!