Page 1 of 1

BenQ upgrade 1600-1620 official firmware

PostPosted: Wed Aug 25, 2004 12:31 pm
by WNTR
The official upgrade firmware is out :D

http://www.benq-eu.com/ServiceAndSuppor ... roduct=641

PostPosted: Wed Aug 25, 2004 1:42 pm
by Ian
Nice.. its about time too!

PostPosted: Wed Aug 25, 2004 1:55 pm
by Ian
Media list for this firmware:

Support DVD+R DL (Double Layer) media:
1. MKM (Mitsubishi)
2. Ritek

Support 16x DVD+R media:
1. Philips (C16)
2. Mitsubishi MCC (004)
3. TAIYO YUDEN (T03)
4. Prodisc (R04)
5. Maxell (003)
6. Daxon (AZ3)
7. RicohJPN (R03)
8. Ritek (R04)
9. SONY (D21)
10. TDK (003)
11. CMC MAG (M01)

For 8x DVD+R media which is able to write at 16x:
1. Daxon (AZ2)
2. LeadData (S03)
3. SONY (D11)
4. TDK (002)
5. TAIYO YUDEN (T02)
6. RicohJPN (R02)
7. Prodisc (R03)

For 8x DVD-R media which is able to write at 16x:
1. Daxon (008S)
2. SONY (08D1)
3. TAIYO YUDEN (G02)

I gotta give BenQ credit. They've added support for a lot of DVD+R media. Hopefully they can do the same with DVD-R

PostPosted: Wed Aug 25, 2004 2:15 pm
by aviationwiz
Impressive...

PostPosted: Wed Aug 25, 2004 2:24 pm
by WNTR
Ian do you still have the 1600 used for that preview? If so you can use this upgrade and do some testing.

PostPosted: Wed Aug 25, 2004 2:31 pm
by Ian
WNTR wrote:Ian do you still have the 1600 used for that preview? If so you can use this upgrade and do some testing.


Sure. Here's the new firmware for the DW1620. Don't use this one if you're trying to upgrade from a DW1600.

ftp://62.253.210.196/dvd-rw/firmware/dw1620a/b7h9.zip

PostPosted: Wed Aug 25, 2004 3:18 pm
by ItalianJob
Ian wrote:Media list for this firmware:

Support DVD+R DL (Double Layer) media:
1. MKM (Mitsubishi)
2. Ritek


Rhaaa ! NEC will be -definitively- the last to have an official DL Ritek support on their DL burners #-o :x ](*,)

PostPosted: Wed Aug 25, 2004 5:24 pm
by WNTR
RicohJPN-R02 8x +r can now be burned at 16x. I've tried it but so far 4 coasters. With Nero-cdspeed-create data disc goes to 14x and then get write error. :cry: