CDRLabs.com

Like the topic says, I am planning on ordering a DVD burner tonight or tommorow, and from what I have read it seems like either tied for the best or the best, unless there is something I don't know.

So any comments?

Thanks

If you can get your hands on a Plextor 716A; that is what I consider the best drive: Bundled software and support are second to none. I have the 712A, but those have pretty much disappeared from the market. As of last weekend, several sites were sold out of the 716A. Also, several retailers have raised their prices on this drive lately, so shop around for price and reputation!

Check Best Buy if you want the Plextor PX-716A @ $100, AMIR. If you want to save $35 on the second best, get the NEC ND-3520A.

Hi!

The NEC 3520 isnßt bad, but the FW-support from NEC is one of the worst. If you have the money, go for the Plextor. A very good writer with a very good FW-support

burning my first dvd+r disk ever, in my new 3520

so far everything is good with this drive

for my xbox burns i use my pioneer 108 though, which is installed in same machine

While NEC is slow with releasing firmwares. The current firmware is ok.
The plextor does have some fancy extra's but is that worth double of the NEC's price that's up to you to decide.
WHen you mainly burn +R I would recommend Benq 1620 (PRO) but on -R the NEC is the better drive.
For us Euro's Philips also gives 2 years waranty on there burners. Just for the folks who allways say Plextor has 2 years.

The plextor does have some fancy extra's but is that worth double of the NEC's price that's up to you to decide.

Definitely not. Besides, not everyone is having good luck with the 716A. Check the ExtremeMHZ for proof that.

I have my NEC 3520 now almost 4 weeks and did use SONY8x(burnt 12x)
and use RICOH_2.4 DL+(burnt 4x), Philips4x(burnt 4x) and I'm satisfied about tis machine, depending if you're use Japanes names(made in Taiwan)

Harry

Plextor doesn't cost that much more and the
quality & firmware support are worth the few
extra bucks it cost. I bought both my
Plextor 708A and the 712A at
futurepowerpc.com for a very
resonable price and great service!
Right now they have the Plextor 716A for
$119.95 with a $30 mail in rebate; that is
$89.95 total cost: Plextools is worth that!

steelly wrote:Plextor doesn't cost that much more and the
quality & firmware support are worth the few
extra bucks it cost. I bought both my
Plextor 708A and the 712A at
[-X futurepowerpc.com =D> for a very
resonable price and great service!
Right now they have the Plextor 716A for
$119.95 with a $30 mail in rebate; that is
$89.95 total cost: Plextools is worth that!

Of course you have to deal with a mail in rebate. I haven't seen feedback either way on the fulfillment house that Plextor is using for their rebates.

Plextor

I received the $30 Rebate today on my Plextor 712A;
How is that for luck on your question?
The clearing house is the same that Kragen's Auto use.
You can follow your rebate online from beginning
to end.
Plextor is a class act from top to bottom: They are Great!
Look below for online confirmation of my Plextor Rebate.


English • Français
Look Up a Rebate | Contact Us about a Rebate
Submission Details
Here are the details for the submission you selected.

Plextor Corporation

Promotion PX-712A and PX-712UF $30 MIR
Rebate Number 050925
Rebate Amount $30.00
Currency USD
Promotion Type Rebate
Submission ID 49056507
Status Your rebate check was mailed on 15-Feb-2005. Please allow approximately two weeks for delivery.

Questions? Visit our customer service area.

New Search | Return to List

Copyright ©2005 CPG, Inc. All rights reserved. | WEBSDLPRD43 | PROD_PDO

NEC 3520A now only cost in the Netherlands € 62.50 so the first time it arrives it costed € 85.-

8x DVD+R/DL and 32x CD-RW is very comfortable.

Add the 109 to that fine list.