Page 1 of 1

Old pc with new hardware - can you help?

PostPosted: Tue Jul 05, 2005 6:42 pm
by richmaysa
Hi. Sorry for posting what has probably been asked b4, but I caould not find what I needed. I have an old AMD Athlon 950mhz, 512MB, 80GB, 32MB ATI AIW running W2K and have recently bought an LG GSA-4163B DVD burner. After burning 2 CDR's, drive has stopped reading any type of disc. When trying to burn, says no media inserted. Do you think my pc specs are too low or should I RMA it as it's probably faulty? I did see min specs somewhere as P4 2Ghz, but how come similar drives have min specs as P3 800Mhz? Could the fault be with my 300W PSU? Should I upgrade to 500W? As a newbie, I's hate to discover after getting a replacement that it's down to my pc specs. Can anyone give some help and advice?

PostPosted: Tue Jul 05, 2005 11:47 pm
by hoxlund
300 watt power supply could very well be doing it

i could recommend trying a bigger power supply or upgrading your firmware to the latest if not done already

also make sure your burning software is up to date

PostPosted: Wed Jul 06, 2005 7:22 pm
by burninfool
Did you use the IDE cable that came with the burner?
If not I would replace it.

PostPosted: Wed Jul 06, 2005 11:16 pm
by hoxlund
yes please use a 40 pin 80 wire ide cable

again with my illustration

use the type of cable that is on the left

PostPosted: Thu Jul 07, 2005 4:06 pm
by richmaysa
Hi. Wow, thanks for all the suggestions. I did not receive a cable with the burner - was OEM. Just the burner and instruction manual. Had an old Sony CD-RW 10x that I was replacing, just took that out and put the burner in, set as master on same ribbon cable as Creative DVD-ROM. Ribbon cable looks right. Forgot to mention using Nero 6.3.0.0. One thing I did try was fit the burner to my work pc, which is a P42.4ghz machine and got the same result - says no media present when trying to burn and won't read any written discs. Seems it's time to RMA it.

Thanks again to hoxlund and burninfool for your help and suggestions. I know exactly where to come to next time.

PostPosted: Fri Jul 08, 2005 1:54 am
by hoxlund
keep coming here, thats all i ask