Page 1 of 1
Burning with New BenQ BSMB Firmware
Posted:
Thu Nov 03, 2005 2:43 amby TCAS
Upgraded from BSLB to new BenQ 1640 BSMB with/Without MSCE (new Versio)
Media:Maxcell DVD-R (8X0 MIC (RG03) MIJ
OverSpeed/SolidBurn/WOPC: All: ON
Note: Bote Maxcell DVD-/+R are MIJ, The first graph is BSMB without MSCE and second graph is BSMB with MSCE
Posted:
Thu Nov 03, 2005 2:46 amby TCAS
Upgraded from BSLB to new BenQ 1640 BSMB with no MSCE
Media:Maxcell DVD+R (8X0 MIC (Maxcell 002)
OverSpeed/SolidBurn/WOPC: All: ON
Posted:
Thu Nov 03, 2005 3:19 amby TCAS
This time burnt a 3 GB Video BSMB with MSCE
Media:Imation DVD+R (4X0 MIC (RICHOJPN R01 MIJ
OverSpeed/SolidBurn/WOPC: All: ON
Note: I found out the problem was with "OverBurning: in CDSpeed being "ON" and must be "Disable" then everything will be fine.
Posted:
Thu Nov 03, 2005 4:22 amby TCAS
Another Burn this time with unbranded "great Quality" DVD+R (8X) MIc "OPTODISC" 0R8 (000) MIT.
OS/SB/WOPC: All ON
OverSpeed in CDSpeed:Disable
BenQ 1640 F/W BSMB with embadded MSCE
Posted:
Thu Nov 03, 2005 11:22 pmby TCAS
Media:Maxcell DVD-R (8X) MIC (RG03) MIJ
OverSpeed/SolidBurn/WOPC: All: Off (Disable)
Note: This time with OS/SB/WOPC are off the process of burning is done with much acceptable level and the disc is burned at rated speed (8X), for comparisson of this with all OS/SB/WOPC on see the previous post for this disc.
Posted:
Fri Nov 04, 2005 9:26 pmby ETP
hey TCAS! Time to flash my drive again!
Posted:
Fri Nov 04, 2005 11:00 pmby TCAS
The error notes on earlier posts are result of having overburn function in Nero CDSpeed enable by disabling this function no error was warrented.
Posted:
Mon Nov 07, 2005 5:46 amby slimeballzz
This is my first burn with the new software and firmware:
Posted:
Mon Nov 07, 2005 2:23 pmby TCAS
Very good and clean burning.
Posted:
Tue Nov 08, 2005 5:02 pmby KenW
I have been seeing those same cd speed errors on my system , on my BenQ 1640 as well as my pioneer 110D. my cd speed is 4.9.3 then 4.10 I dont see errors when using normal burning program like nero 7.0.1.2 or imgburn from lightning.
I am thinking there has been something not right with the cd speed create data disc writer since about 4.04 if anyone would like to comment i would love to hear others thoughts on, the cd speed burning error messages.
Posted:
Tue Nov 08, 2005 5:08 pmby dolphinius_rex
The BenQ DW1640 seems to like TYG03 media much more with BSMB
