Page 1 of 1

LG GSA -H10N BURNER

PostPosted: Sat Jun 10, 2006 8:01 am
by dellboy
Has anyone out there got the the new lg dvd writer,
if so are they pleased with it .
Is it a good burner.
This LG is available here in the uk , but i am in two minds at the moment wether to purchase the burner as there does not seem to
be any reviews or latest tests.

PostPosted: Sat Jun 10, 2006 8:50 am
by Ian
I ran a few tests back in April. It's a very fast drive but I wasn't impressed with the jitter rates:

http://www.cdrlabs.com/phpBB/viewtopic.php?t=21565

PostPosted: Sat Jun 10, 2006 10:37 am
by dodecahedron
it seems that the GSA-H10N and GSA-H10A are the same hardware but with different firmware. the H10A can be crossflashed to the H10N.
discussion here: http://club.cdfreaks.com/showthread.php?t=177603
cdfreaks did a review of the H10A: http://www.cdfreaks.com/article/272
so you can read the review and draw conclusions about the H10N.

also, here's a topic at cdfreaks that has lot's of media scans of the H10N.
http://club.cdfreaks.com/showthread.php?t=179029

apparently the jitter issue is only when tested in BenQ drives, but generally the discs play fine in other players. no concrete info on this as of now AFAIK.

PostPosted: Thu Jun 15, 2006 8:11 am
by Gabe
I made some scans:

http://cdrlabs.com/phpBB/viewtopic.php?p=156866#156866

The TTH02 from Datawrite are crap, my Benq 1655 shows very similar results. But look at the scan with the Soyn, very crazy differents between scans with Benq 1640 and LiteOn 1653.

Maybe the higher jitter confuses the Benq, my H10N had no problems to read the burned media at 16x

More scans will come in the next weeks

PostPosted: Thu Jun 15, 2006 8:24 am
by dodecahedron
Gabe wrote:But look at the scan with the Soyn, very crazy differents between scans with Benq 1640 and LiteOn 1653.

Maybe the higher jitter confuses the Benq, my H10N had no problems to read the burned media at 16x
yeah, it's weird!

Gabe wrote:More scans will come in the next weeks
good! thanks.
i too will scan next week burns from my new GSA=H10L.

PostPosted: Thu Jun 15, 2006 9:47 am
by Gabe
dodecahedron wrote:i too will scan next week burns from my new GSA=H10L.


U have the 10L with LS? Can u make a 16x-write-test to see it uses P-CAV or CAV? Thank u

PostPosted: Thu Jun 15, 2006 11:35 pm
by dodecahedron
i can and will as soon as i have the time to install the drive.
but why? you want to confirm it's Renesas chipset?
that has already been confirmed.
http://club.cdfreaks.com/showthread.php?t=182304
i'ts Renesas R8J32018FPV chipsset, same as the GSA-H10A/N.

PostPosted: Fri Jun 16, 2006 1:04 am
by Gabe
dodecahedron wrote:i'ts Renesas R8J32018FPV chipsset, same as the GSA-H10A/N.


Thank u for the info

samsung 18x burner

PostPosted: Fri Jun 16, 2006 4:46 pm
by dellboy
I THINK I WILL WAIT FOR THE NEW SAMSUNG 18X DVD BURNER.

DELL.

PostPosted: Fri Jun 16, 2006 5:32 pm
by Scour
Why donĀ“t take a Benq or Pioneer?