Page 1 of 1

Windows Server 2003, SH-S182M and DVD-RAM access problem

PostPosted: Fri Nov 24, 2006 7:38 am
by fastleo63
Installed onto an IBM pSeries 232, O.S. Windows Server 2003, Std. Edition.
Latest firmware flashed on drive.
Latest Panasonic driver from BHA (meiudf.sys v4.0.8.0).
After formatting with DVDForm, if I open "My Computer", the drive is shown as "CD-ROM" instead of "DVD-RAM".
If I click on the drive, drag anything into it, I always obtain the same message: "Access denied".
Even the "refresh" option (F5) doesn't work.
O.S. compatibility problem?
Note: I was logged as a system administrator, with full access to all drives/shares, and acting directly from the server's keyboard/mouse/video...

Media: Imation DVD-RAM Type 2 (3x)
Media Information
Region information N/A not a DVD-VIDEO
MediaCode OptodiscTechnologyCorporation
UDF Format Type V2.00
UDF Volume Name RAMUDF20
UDF Application id
UDF Implementation id HCPOSSD_UDF
UDF Recording Date/Time (mm/dd/yyyy) 8/ 6/2006 23:43:56
Format Capacity 4.27GB(4.58GB)
Book Type DVD-RAM
Media Type DVD-RAM
Available Write Descriptor zCLV 3.0x 4155KBps
Data area starting sector 31000h
Data area end sector 22211Fh
Linear Density 0.280um/bit
Track Density 0.615um/track
Number of Layers 1

Complete Media Code
00000220 0E 09 0A 0B 0D 0D 0B 0D 0D 4F 70 74 6F 64 69 73 .........Optodis
00000230 63 20 54 65 63 68 6E 6F 6C 6F 67 79 20 43 6F 72 c Technology Cor
00000240 70 6F 72 61 74 69 6F 6E 20 0D 20 20 20 20 20 20 poration .
00000250 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00 .......
00000260 00 00 00 00 00 00 00 00 00 01 01 7B 02 6E 32 32 ...........{.n22

PostPosted: Sat Nov 25, 2006 7:13 pm
by Ian
Are those drivers even supported by Server 2003? I bet they're not.

You might want to give InCD a try.

PostPosted: Mon Nov 27, 2006 4:47 pm
by fastleo63
Tried InCD 4 & 5, but they are too much "unstable" for a Server o.s....