Page 1 of 1

unrecoverable read error with Pioneer and Nero?

PostPosted: Thu Aug 04, 2011 10:45 pm
by SkaarjMaster
Just burned two data DVDs on Verbatim DVD-Rs (DataLifePlus, the good stuff from Rima, 1792). Used the Pioneer DVR-216D and Nero with the first one at about 3.5GB turning out fine and the next one gave a "unrecoverable read error" on the last 3 DVD-Rs in the stack. I ran Nero InfoTool and the first good burn DVD-R shows up but I can't get the bad burn one to show up at all; it says no disc inserted whether in the Asus drive or Pioneer drive. I can't tell for sure if it's the hard drive, the DVD-R, or the Pioneer burner. It looks like it happened about a minute and a half into the whole process that would have taken around 3-5 minutes total. Can anyone tell from this log file partial? Thank you.

EDIT: Nevermind, the last 3 DVD-Rs in the stack were bad. I just burned all the data on one DVD+R DL in the Pioneer with Nero and no problems!!! Of course, anyone that wants to agree with my conclusion, feel free to comment.:)

4.8.2011
ISO compilation
10:08:06 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:08:06 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:08:06 PM #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-216D running

10:08:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

10:08:06 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

10:08:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1485711 (330:09.36, 2901MB)

10:08:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

10:08:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-216D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:08:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:08:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1485712 (1485712) = #1485712/330:9.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1485712 blocks [PIONEER DVD-RW DVR-216D]
--------------------------------------------------------------

10:08:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-216D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3042738176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1485712 | lead-out | 1 | 0x41 | 0x00

10:08:08 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:08:10 PM #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

10:08:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:08:10 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:08:11 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:08:11 PM #17 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

10:08:11 PM #18 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

10:08:11 PM #19 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

10:08:11 PM #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:09:49 PM #21 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x0BEC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0xFF 0xFF 0x04 0x70 0x0E
0x00 0x00 0x00 0x00 0x11 0x05

10:09:49 PM #22 CDR -1128 File Writer.cpp, Line 311
Unrecoverable read error

10:09:49 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:09:49 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:09:49 PM #25 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 767

10:09:49 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9200 bytes, created 8/20/2008 1:58:58 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.83a, size=44944 bytes, created 8/20/2008 1:58:58 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\iaStor.sys': Ver=8.5.0.1032, size=324120 bytes, created 7/20/2008 1:44:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

"Sense Key: 0x03 (KEY_MEDIUM_ERROR)"
This line would suggest to me a DVD-R media error and maybe the last 3 in the stack were bad. Any ideas?