Page 1 of 1

Error-9 in sector 17152 with Click'N Burn Pro 2.0

PostPosted: Thu Feb 20, 2003 1:46 pm
by ramaflore
Hello,

This is the error message when doing a test before writing a data cd I get;

Error-9 in sector 17152 with Click'N Burn Pro 2.0

I tried

Os: W98SE
cd-writer: Phillips Jackrabbit 24x12x40
Others soft installed: CloneCD, Isobuster, WInIso

Thanks for your help

PostPosted: Fri Feb 21, 2003 12:09 am
by dodecahedron
did you try other media?

PostPosted: Fri Feb 21, 2003 6:56 am
by ramaflore
No, I have not tried because it was only a test !

I will try and I will let you know.

Do I need to uninstall the Aspi layer 4.61 ??

PostPosted: Fri Feb 21, 2003 2:39 pm
by ramaflore
The same troubles.

Please, if you have others suggestions let me know, thanks.

PostPosted: Fri Feb 21, 2003 8:51 pm
by dodecahedron
what software do you use for burning?
try a different program maybe? try Nero?

i don't know if you should remove ASPI, b/c i don't know if the program you use need it - IsoBuster, WinIso. check up their info/websites. if they don't need APSI, maybe try removing it see if that helps.

what media did you use? try using quality media: Taiyo Yuden, Mitsubishi/Verbatim.

PostPosted: Sat Feb 22, 2003 5:37 pm
by ramaflore
what software do you use for burning?


I'm using Click'N Burning Pro 2.0
try a different program maybe? try Nero?


No problem with CLoneCD. I have tried Nero last version, but I had an unsolved problem. I had "SCSI targert error". I have not SCSI cd-writer.

what media did you use?


The same brandname as my cd writer Phillips cd-r 80 700 Mb

Thanks .

PostPosted: Sat Feb 22, 2003 7:51 pm
by dodecahedron
Phillips is made by CMC, and it's not very good.
try other media.
if you can get it, try Fuji media, or Verbatim DataLifePlus.
if you can't get these try some other: TDK, Memorex or other branded media.

you can have a SCSI error even if you don't have a SCSI drive...some SCSI stuff is general to all CDRW drives.
if you give more info maybe someone can help you out with the Nero problems you've had.

PostPosted: Sat Feb 22, 2003 11:09 pm
by KCK
dodecahedron:

Apparently the problem is more complicated; see

http://club.cdfreaks.com/showthread.php ... adid=63944

PostPosted: Sun Feb 23, 2003 3:44 pm
by ramaflore
For now, I don't have Nero in my computer.

I want only to run Click'N Burn Pro. This program is the same than Prassi Primo CD Pro.