Home News Reviews Forums Shop


Use CD-ROM to play DVD!

CPU's? Motherboards? Video cards? Talk about it here.

Use CD-ROM to play DVD!

Postby kotrtim on Fri Jul 30, 2004 2:45 am

Mod Your CD-ROM to Watch DVD Movies"
Philip Chan - 7/28/04

DISCLAIMER: This article is for information purposes only - neither Overclockers.com nor the author will be held responsible for any actual or consequent damages by anyone choosing to attempt this modification.

The DVD format is a new disc format. DVDs can store more data than CD-ROMs, and is a great format to store high-quality videos. DVD-ROM drives are getting lower and lower nowadays, around RMB$300( US$36.24) to RMB$350 (US$38.66). But isn't it a waste to buy a DVD-ROM drive just to watch movies? Why not make good use of your CD-ROM drive?

After continous tests, I found out that we can use CD-ROM drives to watch most retail DVDs. You just need to mod your CD-ROM drive a bit. It's not very complicated, most people can do it.

There are two types of CD-ROM drives we can mod:

1. 24x to 40x
2. 40x or higher

Drives slower than 24x are too old to be modded.

24x to 40x CD ROMs

Laser Head Adjustments:

The track pitch of CDs is 1.6 microns, and the track pitch of DVDs is only 0.8 microns. The minimum length of track pits of CDs is 0.843mm, and the minimum length of track pits of DVDs is 0.293mm. That's why DVD discs can store much more data in the size of a CD.

Pinpointing this situation, we need to adjust the laser head so it can read discs with smaller track pitchs and shorter track pits. Open up the CD-ROM drive, do you see a lens on the rail? That's the laser head. On the side of the laser head, there's a screw you can adjust.

This is the key of this mod.

This screw can adjust the size of the laser beam that lands on the disc. Referring to the above, after adjusting, the laser beam should be less than 0.293mm, to suit the needs of DVD discs. So turn that screw 2-3 times. I got this number through trial and error. Mark with a pencil, in case you forget how many times you turned that screw.

Speed adjustments:

DVD-ROM drives can play DVD movies smoothly at 4x speed. If we're modding a 32x CD-ROM drive, the rotation speed is obviously too high, increasing heat, and shortening the life of the drive.

So we need to decrease the speed of it.

Most people know that power supplies can provide 5V (red wire) and 12V (yellow wire) electricity output for Molex connectors. Find the Molex connector you'll plug into the modded CD-ROM drive, cut the yellow wire or insulate it with tape, so only 5V of electricity is transferred to the CD-ROM drive. The speed of the drive is now 32 * 5/17 = 9.41x and can now fulfill our requirements.

40x or higher CD ROMs

When 40x CD-ROM drives are released, most manufacturers are already producing DVD-ROM drives. To lower cost, they use the same core as DVD-ROM drives with DVD functions disabled. What we need to do here is to re-enable the DVD function.

Open up the CD-ROM, behind the circuit board, look for a jumper that says DVD JUMP. Find a jumper to connect this jumper. Thin metal wire also works fine.

OK, so the DVD function is unlocked, but we still need to decrease the speed. Use the instructions above on how to decrase the speed of the drive.

Notes:

1. Modded drives cannot be detected in POST, that means you cannot use it in DOS. But once you get into Windows, the drive works fine.
2. Modded drives have no region code problems.
3. Modded drives MIGHT NOT read DVD9 discs, that's why I said you can watch most retail DVDs in the beginning.

Happy modding!

==========

I translated the above article from a Chinese site; if the above article theoretically works, and you have spare time and some spare CD-ROM drives, you can try it. Lots of people (including me) still don't have DVD-ROMs and would like to watch DVDs without buying a DVD-ROM drive.

Thank you.

NOTE: Brian cracked open a 50x drive and did not find any jumper, so what's outlined here may not apply to all drives.

Philip Chan




does this make sense?
kotrtim
Buffer Underrun
 
Posts: 23
Joined: Thu Jul 24, 2003 7:38 am

Postby Ian on Fri Jul 30, 2004 10:45 am

The guy is smoking crack.
"Blu-ray is just a bag of hurt." - Steve Jobs
User avatar
Ian
Grand Poobah
 
Posts: 15127
Joined: Sun Apr 08, 2001 2:34 pm
Location: Madison, WI

Postby Kennyshin on Fri Jul 30, 2004 10:48 am

Which Chinese site?

Can the author also help me to play Blu-Ray and HD-DVD with my DVD drives? :D
Kennyshin
CD-RW Player
 
Posts: 1173
Joined: Tue May 14, 2002 12:56 am

Postby kotrtim on Fri Jul 30, 2004 11:52 am

the "DVD jumper" idea make sense but i don't all CD-rrom drives use DVD core?

about the "screw" idea,
if u have a dvd-rom, that means u can also screw it to "blue" laser so that it can read DVD.......
i think this is non sense

bcoz cd chipset and dvd are different right? error correction are different too
CD c1/c2
DVD pi/po
kotrtim
Buffer Underrun
 
Posts: 23
Joined: Thu Jul 24, 2003 7:38 am

Postby eliminator on Fri Jul 30, 2004 5:28 pm

Ian wrote:The guy is smoking crack.



:lol:
User avatar
eliminator
CD-RW Player
 
Posts: 1150
Joined: Mon Feb 18, 2002 4:15 am
Location: TheLoneStarState

Postby pranav81 on Sat Jul 31, 2004 12:56 am

I dont think this is possible.


::Pranav::
Increasingly mathematics will demand the courage to face its implications.
pranav81
CD-RW Player
 
Posts: 1160
Joined: Thu Dec 05, 2002 6:57 am
Location: Sunnyvale, CA

Postby Shakari on Thu Aug 19, 2004 7:59 am

pranav81 wrote:I dont think this is possible.


::Pranav::


Its not reducing the 12V supply to 5V while it would slow the drive down would be highly inaccurate, and would also make most of the 12V logic controls behave erratically if they would work at all :)

Bearing in mind 5V rail can vary from about 4.3V to 5.6V and 12V from 11.3 to 12.7 :D so to say the least I would not try it :)
Shakari
Buffer Underrun
 
Posts: 4
Joined: Thu Aug 19, 2004 7:13 am

Postby pranav81 on Thu Aug 19, 2004 8:54 am

This is not possible.


::Pranav::
Increasingly mathematics will demand the courage to face its implications.
pranav81
CD-RW Player
 
Posts: 1160
Joined: Thu Dec 05, 2002 6:57 am
Location: Sunnyvale, CA


Return to General Hardware Discussion

Who is online

Users browsing this forum: No registered users and 5 guests

All Content is Copyright (c) 2001-2024 CDRLabs Inc.