Page 1 of 1

probleming regarding drive testing in "CD-ROM round up&

PostPosted: Thu Jan 30, 2003 7:36 pm
by freestyle
i have a 52x creative cd-rom tested in CDRLabs test. I run on windows XP and for whatever reason when i try tests with Nero CD SPeed, i get reads speeds of about 18x! when i burn on the fly it burns at like 8x max on a 48x burner! the cd-rom is sec. slave to burner. why am i having this problem? thax

PostPosted: Thu Jan 30, 2003 10:43 pm
by freestyle
ok i moved the cd-rom from the secondary slave to the primary slave. i only increased a minor increase by about 2-3x. its on PIO mode 4 and will not go to DMA mode in windows or in bios. is there ant way to make it multi-word dma or anything? i really wanna burn on the fly w/o buying a new cd/dvd rom. thank you

PostPosted: Thu Jan 30, 2003 11:42 pm
by vbl117
Sometimes you have to uninstall the drive or/and the IDE channel before succeeding in enabling DMA . I had some issues like this with some drives in some cases .

PostPosted: Fri Jan 31, 2003 2:09 am
by cfitz

PostPosted: Fri Jan 31, 2003 8:53 am
by freestyle
yes ive done all of that before, uninstalling, going into registry, reading faqs none have work unfortunately. any other tips? im getting deseperate hehe

thx

PostPosted: Fri Jan 31, 2003 10:42 am
by Ian
freestyle wrote:ok i moved the cd-rom from the secondary slave to the primary slave. i only increased a minor increase by about 2-3x. its on PIO mode 4 and will not go to DMA mode in windows or in bios. is there ant way to make it multi-word dma or anything? i really wanna burn on the fly w/o buying a new cd/dvd rom. thank you


By default the drive supports PIO Mode 4 (check the BIOS when it boots). If I remember correctly, there is a jumper on the back of the drive that when enabled, will make it UDMA 2.

Of course, you're not really going to see that much of a performance boost by doing that.

Have you tried other discs? Are you using a Mode 1 data CD? If its a CD-R, is the disc finalized/closed?

PostPosted: Fri Jan 31, 2003 7:58 pm
by freestyle
I saw the mention of the jumper either on this site or somewhere else; but for some reason never bothered to check, even when changing ide channels.

Probably due to when i email Creative and they told me it does not support UMDA. Stupid support.

Anyways, to the point, it worked and its performing on par, although i encountered different errors at one time or another when running, probably cause of cds.

Thank you I'm very grateful you opened my eyes to my lazyness lol

Thanks again!