Home News Reviews Forums Shop


90% Done -My New Case (Warning for the Bandwidth Challenged)

General discussion. Come introduce yourself. Talk about whataver you want!

90% Done -My New Case (Warning for the Bandwidth Challenged)

Postby LoneWolf on Thu Nov 18, 2004 11:57 pm

I am finally up and running and at a point where I can post my case project and pictures. Suffice it to say, even simple case mods take a ton of time, though when you're done they don't look near as big a deal to anyone else but yourself. At any rate, I finally settled on an Antec P160SW Performance case. My first step was removing every part from the case and creating the blowhole in the top:

Image

I mounted a low-noise Panaflo 120mm fan under the blowhole, using rubber washers to dampen the vibration. Next, I sleeved my Enermax 470w PSU, replacing all the Molex connectors with black ones. I used Vantec EZ Grip ones for the 5.25"s to make them easier to work with.

Image

And all the fans:

Image

I cut out PaxMate case dampening material and added it to the top, bottom, and backside of the case. The second picture here looks like the paxmate is one complete sheet on the underside of the case; it is not, I cut it to fit around the support stanchions on that side.

Image

Image

At this point, I mounted everything back in the case. Pictures shown are with my cables only 80% cleaned up.

Image

I put the windowed side on to give everyone an indicator of what it is like with the case fully together:

Image

Things I still have to do:
(a) Mount a Fanbus to connect all the fans. I have one, but am going to mount it in a project box, and haven't had the time yet. Will take some creative plastic cutting and a bit of epoxy.
(b) I'm thinking of re-sleeving the PSU ATX cable; it would void my warranty but that cable is way too inflexible with that metal sheathing. If I do this, I'll also replace the Enermax PSU fans with low-noise Panaflos for longer life and lower noise. I also had to remove the Northbridge fan while doing this project; it's failing and the buzzing noise was getting ugly. Don't know if I'll replace it, I really don't think I need to.
c) Wire my SB Audigy 2 to the front panel audio connectors. I have the pinouts, but I have to devise a solid way of connecting them. Alternatively, I may just say "chuck it" and go back to my Soundstorm, even though its analog audio isn't as high quality.
d) Wire up the two temperature sensors that are part of the case so I can display the temps on the front panel.

Hopefully at some point I can switch over to SATA hard disks, which will clean things up further. Hope y'all liked the post.
Intel Q9450 @3.2GHz, Gigabyte GA EP45-UD3P, 4 x 2GB G.Skill @4-4-4-12
Antec P160SW case (modded), Xigmatek 750w PSU
3x 500GB (RAID-5), , OptiArc 7200S, ASUS E818A3T
Creative X-Fi XtremeGamer, Hauppauge HVR-1800, Radeon 4890
Dell 2407WFP
User avatar
LoneWolf
CD-RW Player
 
Posts: 937
Joined: Thu Feb 06, 2003 4:41 pm
Location: Meecheegan

Postby Bhairav on Fri Nov 19, 2004 9:11 am

Nice work!
Q6600@3.1Ghz | Asus P5Q-E | 4GB DDR2-800 | 8800GT | 4TB HDD | Viewsonic vx2025wm
Xonar DX | Pioneer DVR-212 | Pioneer 111L | Benq 1655
User avatar
Bhairav
CD-RW Player
 
Posts: 1239
Joined: Mon Jul 22, 2002 5:44 am
Location: Bombay,India

Postby hoxlund on Fri Nov 19, 2004 12:31 pm

nice project so far, its rare to see a full window but it does look super clean
Thermaltake Core X5 Snow Edition TG Case
Corsair RM1000 Power Supply
MSI X399 Gaming Pro Carbon AC
AMD Threadripper 1950x @ 4.1GHz
Custom Loop w/ EK MSI x399 Monoblock
G.Skill 4x8GB DDR4 3200 RGB Memory
MSI 1080Ti Lightning X Video Card
User avatar
hoxlund
CD-RW Player
 
Posts: 3708
Joined: Mon May 27, 2002 12:55 am
Location: Idaho

Postby MonteLDS on Fri Nov 19, 2004 11:35 pm

your box looks like an alien life form with those rounded cables
User avatar
MonteLDS
CD-RW Player
 
Posts: 989
Joined: Fri Nov 08, 2002 2:32 pm
Location: San Fran Bay Area CALIFORNIA

Postby hoxlund on Sat Nov 20, 2004 1:02 am

that video card in there sure doesn't look like a radeon 9700
Thermaltake Core X5 Snow Edition TG Case
Corsair RM1000 Power Supply
MSI X399 Gaming Pro Carbon AC
AMD Threadripper 1950x @ 4.1GHz
Custom Loop w/ EK MSI x399 Monoblock
G.Skill 4x8GB DDR4 3200 RGB Memory
MSI 1080Ti Lightning X Video Card
User avatar
hoxlund
CD-RW Player
 
Posts: 3708
Joined: Mon May 27, 2002 12:55 am
Location: Idaho

Postby LoneWolf on Sat Nov 20, 2004 10:38 am

hoxlund wrote:that video card in there sure doesn't look like a radeon 9700


It's a Sapphire Radeon 9700 128MB. It's got an Arctic Cooling VGA Silencer on it and 8 OCZ Ramsinks. I currently have it clocked to Radeon 9700 Pro speeds, but I might be able to go higher, as it does have Samsung memory.

The VGA Silencer is fairly quiet, won't die like the stock ATI fan, and exhausts hot air from the graphics card out of the case.
Intel Q9450 @3.2GHz, Gigabyte GA EP45-UD3P, 4 x 2GB G.Skill @4-4-4-12
Antec P160SW case (modded), Xigmatek 750w PSU
3x 500GB (RAID-5), , OptiArc 7200S, ASUS E818A3T
Creative X-Fi XtremeGamer, Hauppauge HVR-1800, Radeon 4890
Dell 2407WFP
User avatar
LoneWolf
CD-RW Player
 
Posts: 937
Joined: Thu Feb 06, 2003 4:41 pm
Location: Meecheegan

Postby hoxlund on Sat Nov 20, 2004 12:14 pm

ive been looking for that cooler buy for my video card, the nvidia 5900 ultra

it uses the nvidia artic silver cooler 4 and no one seems to have it, anyone got a link?

here is the link to mine, i don't know if the stock cooler performs better or what: http://www.3dxtreme.net/index.php?id=le ... a350ultra1
Thermaltake Core X5 Snow Edition TG Case
Corsair RM1000 Power Supply
MSI X399 Gaming Pro Carbon AC
AMD Threadripper 1950x @ 4.1GHz
Custom Loop w/ EK MSI x399 Monoblock
G.Skill 4x8GB DDR4 3200 RGB Memory
MSI 1080Ti Lightning X Video Card
User avatar
hoxlund
CD-RW Player
 
Posts: 3708
Joined: Mon May 27, 2002 12:55 am
Location: Idaho

Postby LoneWolf on Sat Nov 20, 2004 2:08 pm

It appears that nobody has it because Arctic Cooling hasn't made it available yet (probably due to a design issue being reworked). FrozenCPU lists its availability as late 2004-early 2005. Arctic Cooling doesn't list it on their site, so I'd e-mail them and ask.

I'd get rid of your stock cooler once the NV Silencer becomes available. The heatsinks look okay, but it doesn't look like Leadtek put too much thought into that cooling unit possibly sucking in dust and causing issues with the fans.
Intel Q9450 @3.2GHz, Gigabyte GA EP45-UD3P, 4 x 2GB G.Skill @4-4-4-12
Antec P160SW case (modded), Xigmatek 750w PSU
3x 500GB (RAID-5), , OptiArc 7200S, ASUS E818A3T
Creative X-Fi XtremeGamer, Hauppauge HVR-1800, Radeon 4890
Dell 2407WFP
User avatar
LoneWolf
CD-RW Player
 
Posts: 937
Joined: Thu Feb 06, 2003 4:41 pm
Location: Meecheegan

Postby UALOneKPlus on Tue Nov 23, 2004 5:41 pm

Nice....... very nice.
"Life is a great big canvas, and you should throw all the paint you can on it."
-Danny Kaye
User avatar
UALOneKPlus
CD-RW Player
 
Posts: 1082
Joined: Sun Jan 05, 2003 8:28 am

Postby LoneWolf on Wed Nov 24, 2004 11:37 am

Just came into some money this week from selling a spare system. I'm extremely tempted to go out and buy an MSI K8N Neo 2 Platinum S939 Nforce3 Ultra board, and an Athlon 64 3000+ Winchester core. Seeing as CompUSA has a Black Friday special on the PNY Geforce 6800 AGP, I could pair that all up and do a much more extensive remodel of my system.

I know I could wait for the NForce4 boards with PCIe and Native-Command-Queueing support for SATA...but Geforce 68xx boards are impossible to find in PCIe so far, and there are no Arctic Cooling NV Silencers made for the Geforce 6600GT cards...and the current MSI board has a 20-pin ATX connector instead of the new 24-pin style. I think as long as I go Socket 939, that setup should last me for some time to come.
Intel Q9450 @3.2GHz, Gigabyte GA EP45-UD3P, 4 x 2GB G.Skill @4-4-4-12
Antec P160SW case (modded), Xigmatek 750w PSU
3x 500GB (RAID-5), , OptiArc 7200S, ASUS E818A3T
Creative X-Fi XtremeGamer, Hauppauge HVR-1800, Radeon 4890
Dell 2407WFP
User avatar
LoneWolf
CD-RW Player
 
Posts: 937
Joined: Thu Feb 06, 2003 4:41 pm
Location: Meecheegan


Return to The Beer Garden

Who is online

Users browsing this forum: No registered users and 7 guests

All Content is Copyright (c) 2001-2024 CDRLabs Inc.