Home News Reviews Forums Shop


Session fixation error

Nero Burning ROM, Nero Express, NeroVision Express, Recode, InCD, etc..

Session fixation error

Postby Ulysses on Wed Mar 09, 2005 1:10 pm

Currently running NERO v6.6.0.8 on Win98SE (NO other burning software is installed).

Sometimes at random whenever i continue a multisession data CD writing to CD-R media (different brands of quality media) everything seems like its going to work, burns all the way to 100%, but then I get a message saying "Session fixation error/Could not perform fixation"! :o

NO problem burning to CD-RWs.

I put the disc back into my recorder and went to Nero's 'Disc Info' feature and it says 'Session is Open'... i tried BOTH options in the bottom left of the window ['Close Session' and 'Close Disc'] w/o any success: same 'Session Fixation Error' here too...! :-k

Only thing to do hereafter is to throw the CD away, its useless since i'm not able to read whats written to the disc.

i guess that a full Nero log file from the failed write attempt would help to diagnose the issue better:

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/02 16.03.58
ahead WinASPI: File 'C:\PROGRAMMI\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/04 17.35.34
Nero Version: 6.6.0.8
Recorder: <WAITEC STORM 52/3> Version: 1.25 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < 54X CD-ROM >Version: 4.16 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <ESDI_506> HA 1
WAITEC STORM40 (Target 1, E: Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
WAITEC STORM 52/3 (Target 0, F: Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
54X CD-ROM (Target 1, G: Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130568kB)
Free physical memory: 0MB (44kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.3.2005
CD-ROM (ISO)
13.09.21 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13.09.22 #2 Text 0 File Burncd.cpp, Line 2868
WAITEC STORM 52/3
SafeLink activated

13.09.22 #3 Text 0 File Reader.cpp, Line 127
Reader running

13.09.22 #4 Text 0 File Writer.cpp, Line 122
Writer WAITEC STORM 52/3 running

13.09.22 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

13.09.23 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media

13.09.24 #7 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 271461 ( 60:21.36)

13.09.24 #8 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

13.09.24 #9 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: WAITEC STORM 52/3;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

13.09.24 #10 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13.09.24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 162433 (162433) = #162433/36:5.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 162431 blocks [WAITEC STORM 52/3]
--------------------------------------------------------------

13.09.24 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [WAITEC STORM 52/3] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 332969984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
108879 | lead-in | 0 | 0x41 | 0x00
108879 | 2 | 0 | 0x41 | 0x00
109029 | 2 | 1 | 0x41 | 0x00
271462 | lead-out | 1 | 0x41 | 0x00

13.09.24 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 2. Length: 162433 -> 162431.

13.09.24 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13.09.25 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

13.09.25 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13.09.25 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2.400 KB/s)

13.09.25 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #109029

13.09.25 #19 Text 0 File Mmc.cpp, Line 21235
Set BUFE: SafeLink -> ON , Adapt writespeed to disc : ON

13.11.44 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13.11.48 #21 Text 0 File Mmc.cpp, Line 15908
<WAITEC STORM 52/3 > start Close Session

13.11.59 #22 SCSI -1093 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x02 0x00

13.11.59 #23 CDR -1093 File ThreadedTransferInterface.cpp, Line 1288
No seek complete

13.11.59 #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1288
Could not perform Fixation

13.11.59 #25 Text 0 File Mmc.cpp, Line 15908
<WAITEC STORM 52/3 > start Close Session

13.12.32 #26 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x00

13.12.32 #27 CDR -1176 File ThreadedTransferInterface.cpp, Line 1288
Session fixation error

13.12.32 #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1288
Could not perform Fixation

13.12.32 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (2.400 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 10.55.38
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 05/05/99 22.22.00
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00 (Adapter driver for rec)

Registry Keys:


As always, would appreciate any help or advice. TIA
"Houston, we've got a problem..."
(Jim Lovell, Apollo 13)
Ulysses
Buffer Underrun
 
Posts: 40
Joined: Mon Jan 31, 2005 7:41 am

Postby CCampbell on Thu Mar 10, 2005 9:28 am

Hi Ulysses,

You are getting a 'No Seek Complete' error message and this is 95% of the time caused by hardware. It's usually one of the following issues...

1) Poor Media
2) Old Firmware
3) Dust, smudges, or scratches on the media
4) Dust on the Optical head of the recorder
5) Poor Power to the recorder
6) A recorder that is in need of service

Below is an exerpt from your log file:
13.11.59 #22 SCSI -1093 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x02 0x00

13.11.59 #23 CDR -1093 File ThreadedTransferInterface.cpp, Line 1288
No seek complete


Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby Ulysses on Thu Mar 10, 2005 10:02 am

Hi CCampbell, thank you for these precise details...maybe time for a new model drive... :cry:
"Houston, we've got a problem..."
(Jim Lovell, Apollo 13)
Ulysses
Buffer Underrun
 
Posts: 40
Joined: Mon Jan 31, 2005 7:41 am

Postby CCampbell on Thu Mar 10, 2005 11:19 am

I would recommend trying to clean the Optical head before you go spending any more 'cash'. This works quite often.

Regard,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby Ulysses on Thu Mar 10, 2005 12:58 pm

hmmm...guess i've to dismantle the whole drive, that's my problem... :oops:
"Houston, we've got a problem..."
(Jim Lovell, Apollo 13)
Ulysses
Buffer Underrun
 
Posts: 40
Joined: Mon Jan 31, 2005 7:41 am

Postby dodecahedron on Fri Mar 11, 2005 1:28 am

or you could try using one of those CD-Cleaner CDs that have a little brush on the CD and it cleans the lens. though they're generally not recommended, it might be better than taking apart your drive...
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the land of Mordor, where the Shadows lie
-- JRRT
M.C. Escher - Reptilien
User avatar
dodecahedron
DVD Polygon
 
Posts: 6865
Joined: Sat Mar 09, 2002 12:04 am
Location: Israel

Postby CCampbell on Fri Mar 11, 2005 5:01 am

And sometimes just grabbing a can of compressed air and carefully blowing in the drive with it will do the trick.

But if that fails, and the drive is out of warranty, I would open the drive up and use an Anti-Statick cloth, or one of those Camera Lens cleaning cloths to gently wipe off the optical head. And use compressed air to clean the rest of the inside of the drive.

P.S. Those CD Cleaner CD's have the potential of the brushes 'scratching' the optical head. But they have been known to do the trick, but I would ont use it that often.

Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA


Return to Nero (Formerly Ahead Software)

Who is online

Users browsing this forum: No registered users and 4 guests

All Content is Copyright (c) 2001-2024 CDRLabs Inc.