more info. post the Nero log!
sounds like it could be a bad media problem. what media were you using?
Arch Stanton, now that sounds familiar...
|
||||||||
|
11:51:36 PM #1 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
11:51:36 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:51:36 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SHM-165H6S running
11:51:36 PM #4 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media
11:51:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4064523 (903:13.48, 7938MB)
11:51:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)
11:51:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
11:51:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:51:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 4064524 (4064524) = #4064524/903:13.49
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4064374 blocks [E: LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------
11:51:37 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [E: LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8324145152, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4064524 | 4064374 | 0x00
0 | 1 | 1 | 0x41 | 4064524 | 4064374 | 0x00
4064524 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:51:37 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:51:37 PM #12 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
11:51:37 PM #13 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.
11:51:37 PM #14 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
11:51:37 PM #15 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
11:51:37 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:51:37 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 470
Disc finalized, LBA total Image size: 4064524 (7938MB), Last LBA L0: 2032271 (3969MB)
11:52:21 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x034a2400: Len x804
11:52:21 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 2032272 (1F0290h, 3969MB) -> OK, confirmed setting
11:52:21 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1
11:52:21 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
11:52:21 PM #22 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22028F h (LBN: 1F028F h, 3969 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 00 00 28 64 00 - 28 64 19 1B 0B 0B 0E 0F %%7..(d.(d......
01 00 00 00 00 19 1B 0B - 0B 0E 0F 01 00 00 00 00 ................
11:52:21 PM #23 Text 0 File DVDR.cpp, Line 6579
Drive: LITE-ON DVDRW SHM-165H6S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:52:21 PM #24 CDR -1207 File DVDR.cpp, Line 6006
Book Type automatically set to: DVD-ROM
11:52:21 PM #25 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
12:13:08 AM #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1947
Burning Layer 2
12:13:08 AM #27 Text 0 File DVDPlusDualLayer.cpp, Line 1958
Perform layer 1 to 2 jump before writing at address 2032272 (1F0290h)
12:33:53 AM #28 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SHM-165H6S> start writing Lead-Out at LBA 4064374 (3E0476h), length 0 blocks
12:33:53 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:34:15 AM #30 SPTI -1106 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
12:34:15 AM #31 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
12:34:15 AM #32 Text 0 File DVDR.cpp, Line 6579
Drive: LITE-ON DVDRW SHM-165H6S
Book Type request [LO], rev 3: DVD+R DL
Changing the Book Type was finished successfully, return code 0
12:34:15 AM #33 CDR -1106 File ThreadedTransferInterface.cpp, Line 1943
Power calibration error
E: LITE-ON DVDRW SHM-165H6S
12:34:15 AM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1943
Could not perform end of Disc-at-once
12:34:16 AM #35 SPTI -1106 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
12:34:16 AM #36 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
12:34:16 AM #37 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
12:34:16 AM #38 Text 0 File DVDR.cpp, Line 6579
Drive: LITE-ON DVDRW SHM-165H6S
Book Type request [LO], rev 3: DVD+R DL
Changing the Book Type was finished successfully, return code 0
12:34:16 AM #39 CDR -1106 File WriterStatus.cpp, Line 167
Power calibration error
E: LITE-ON DVDRW SHM-165H6S
12:34:16 AM #40 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:34:16 AM #41 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
12:34:15 AM #30 SPTI -1106 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
11:52:21 PM #22 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22028F h (LBN: 1F028F h, 3969 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 00 00 28 64 00 - 28 64 19 1B 0B 0B 0E 0F %%7..(d.(d......
01 00 00 00 00 19 1B 0B - 0B 0E 0F 01 00 00 00 00 ................
Arch Stanton wrote:I purchased Memorex, not Ritek. Maybe Memorex uses Ritek and puts their name on it, but there was no way for me to know that.
Arch Stanton wrote:I purchased Memorex, not Ritek. Maybe Memorex uses Ritek and puts their name on it, but there was no way for me to know that.
Anyway, I don't think it's the media. These discs have always worked perfect for me, then I made some recent changes, and now I burned three coasters in a row.
The changes were new firmware, new version of Nero, and a new motherboard (which uses a different IDE controller).
Maybe the new firmware is detecting the disc incorrectly? Or, a glitch in Nero or IDE driver.
Return to Nero (Formerly Ahead Software)
Users browsing this forum: No registered users and 7 guests
All Content is Copyright (c) 2001-2024 CDRLabs Inc. |