Home News Reviews Forums Shop


Whoa! Major TY media Snafu.

General discussion about recordable CD, DVD and BD media and write quality testing.

Whoa! Major TY media Snafu.

Postby MonsterMan on Wed Oct 18, 2006 6:52 pm

Yikes. Put a blank (TY 8x DVD-R) into my 111D, and heard noises you don't want to hear a burner make.

Popped the disc out, and here's what I notice (a little late):
Image

Image

Image

It's hard to tell from the crappy pics from my crappy Sony camera in my crappy light, but the disc is alot thicker than normal.

Is it me, or does it look like there are three pieces of plastic making up that disc? Edit: Yup, three pieces #-o

Nice one, TY.

Bonding issue, maybe? Doesn't seem to want to come apart...

Edit: Opps...it DOES seem to want to come apart after all :o
Bonding! :evil:
BenQ 1655, BenQ 1620, LG 4167, Plex PX-716SA, Samsung SH-S162L, SH-S182M, Pioneer 111D, Lite-On SHM-165H6S and 1.9TB of HDDs to feed 'em and an X2/4800 to crunch for 'em.
MonsterMan
CD-RW Player
 
Posts: 387
Joined: Mon Jan 03, 2005 7:38 pm

Postby dolphinius_rex on Wed Oct 18, 2006 7:24 pm

Sadly, I'm not surprised in the least by this. Taiyo Yuden has been going downhill a lot lately, and I've heard of several instances of discs coming apart like you just had happen. Luckily the bonding is only so bad that the disc seperates in your drive or while being taken out of a jewel case in the most extreme cases.

Still, I don't use Taiyo Yuden for important stuff anymore, simply because I can't trust it like I used to. I now use Acro Circle 16x DVD+Rs, Verbatim 8x and 16x DVD±Rs, and Maxell BQ 8x DVD-Rs (in order of importance from least to most). Taiyo Yuden has completely fallen off my use list!! :o
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby MonsterMan on Wed Oct 18, 2006 7:45 pm

I haven't been using them that much anymore. Mostly Verbatium DVD+R 16x media, and now the Scratch Proof TDK 8x DVD-R's.

I can maybe understand the normal bonding issues - bad glue, whatever. But come on, three freakin' pieces of plastic on this disc! Not two like it should be. That's more difficult to screw up.
BenQ 1655, BenQ 1620, LG 4167, Plex PX-716SA, Samsung SH-S162L, SH-S182M, Pioneer 111D, Lite-On SHM-165H6S and 1.9TB of HDDs to feed 'em and an X2/4800 to crunch for 'em.
MonsterMan
CD-RW Player
 
Posts: 387
Joined: Mon Jan 03, 2005 7:38 pm

Postby MediumRare on Thu Oct 19, 2006 12:56 am

Is that a spacer that slipped into the jewel case (like they often put on the top of a spindle)? That still doesn't speak for their QA system but could explain what's going on.

G
User avatar
MediumRare
CD-RW Translator
 
Posts: 1768
Joined: Sun Jan 19, 2003 3:08 pm
Location: ffm

Postby frank1 on Thu Oct 19, 2006 4:37 am

dolphinius_rex wrote: . . .
I now use Acro Circle 16x DVD+Rs, Verbatim 8x and 16x DVD±Rs, and Maxell BQ 8x DVD-Rs (in order of importance from least to most).
I like to know if you have any preference among the Verbatim 8x and 16x DVD±Rs
regarding the real manufacturer: Prodisc, CMC Mag or MBI ?

And this according to the distinction explained for example by lordyu here:
http://club.cdfreaks.com/showpost.php?p ... stcount=38
lordyu wrote:1. Discs with S/N like PAH637JA31035535 6 are made by CMC in Taiwan for Verbatim, CMC.

2. Discs with S/N like 4254F1213-04308C10 (- or +) are made by Prodisc in ??? for Verbatim, ???.

3. Discs with S/N like 5007 512 -R C B 10930 (-R or +R) are made by Moser Baer in India for Verbatim, ???.
User avatar
frank1
CD-RW Player
 
Posts: 334
Joined: Sat Jan 22, 2005 6:59 am

Postby dolphinius_rex on Thu Oct 19, 2006 4:52 am

frank1 wrote:
dolphinius_rex wrote: . . .
I now use Acro Circle 16x DVD+Rs, Verbatim 8x and 16x DVD±Rs, and Maxell BQ 8x DVD-Rs (in order of importance from least to most).
I like to know if you have any preference among the Verbatim 8x and 16x DVD±Rs
regarding the real manufacturer: Prodisc, CMC Mag or MBI ?

And this according to the distinction explained for example by lordyu here:
http://club.cdfreaks.com/showpost.php?p ... stcount=38
lordyu wrote:1. Discs with S/N like PAH637JA31035535 6 are made by CMC in Taiwan for Verbatim, CMC.

2. Discs with S/N like 4254F1213-04308C10 (- or +) are made by Prodisc in ??? for Verbatim, ???.

3. Discs with S/N like 5007 512 -R C B 10930 (-R or +R) are made by Moser Baer in India for Verbatim, ???.


I generally prefer Verbatim made by CMC. I do *NOT* like Verbatim made by Prodisc. MBIL is more middle ground.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby SkaarjMaster on Thu Oct 19, 2006 4:30 pm

Are the TY CD-Rs still good? Is it just the 8X DVD-Rs single layer from them? :o
MSI (unnamed laptop): GS75 Stealth 95F, Pioneer BDR-XD07B
SKAARJ-LAPTOP: Asus G750JW-NH71
SKAARJMASTERDUO: WinXPSP3,C2D E8600,Gigabyte EP45-UD3P,Pioneer DVR-216D,BenQ DW1655,Asus E818A3T.
User avatar
SkaarjMaster
CD-RW Player
 
Posts: 515
Joined: Thu Dec 11, 2003 1:06 pm
Location: Sarasota, Florida USA

Postby dolphinius_rex on Thu Oct 19, 2006 4:37 pm

SkaarjMaster wrote:Are the TY CD-Rs still good? Is it just the 8X DVD-Rs single layer from them? :o


I've seen a lot more defects on TY CD-Rs lately as well, but nothing NEARLY as bad as with the DVDRs. I would say all Taiyo Yuden DVD±R media is affected though.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby MonsterMan on Thu Oct 19, 2006 4:52 pm

MediumRare wrote:Is that a spacer that slipped into the jewel case (like they often put on the top of a spindle)? That still doesn't speak for their QA system but could explain what's going on.

G


These came off of a spindle. The jewel case was just to sit it on while photographing.

It was bonded to the disc pretty good, too. So I don't think it just got "stuck" during packaging.
BenQ 1655, BenQ 1620, LG 4167, Plex PX-716SA, Samsung SH-S162L, SH-S182M, Pioneer 111D, Lite-On SHM-165H6S and 1.9TB of HDDs to feed 'em and an X2/4800 to crunch for 'em.
MonsterMan
CD-RW Player
 
Posts: 387
Joined: Mon Jan 03, 2005 7:38 pm

Postby SkaarjMaster on Thu Oct 19, 2006 10:32 pm

dolphinius_rex wrote:
SkaarjMaster wrote:Are the TY CD-Rs still good? Is it just the 8X DVD-Rs single layer from them? :o


I've seen a lot more defects on TY CD-Rs lately as well, but nothing NEARLY as bad as with the DVDRs. I would say all Taiyo Yuden DVD±R media is affected though.


In that case, I'm glad I still have a 100 CD-R spindle in a half of the 1160s from last year still handy. If the CD-Rs are that bad, I may be buying Verbatim when I run out. Of course, I'll come back here and check again when it's time.;) Thanks man! :D
MSI (unnamed laptop): GS75 Stealth 95F, Pioneer BDR-XD07B
SKAARJ-LAPTOP: Asus G750JW-NH71
SKAARJMASTERDUO: WinXPSP3,C2D E8600,Gigabyte EP45-UD3P,Pioneer DVR-216D,BenQ DW1655,Asus E818A3T.
User avatar
SkaarjMaster
CD-RW Player
 
Posts: 515
Joined: Thu Dec 11, 2003 1:06 pm
Location: Sarasota, Florida USA

Postby frank1 on Fri Oct 20, 2006 8:54 pm

I still have a huge stock of these genuine Taiyo Yuden
sold "in the old days" under the Maxell brand


DVD+R 4x with MID code "YUDEN000-T01-000"
Image
The indications on the disc itself are:
inner hub: 6B417 N0543 9PB
outer: TS00075 - 0804
(The ones ne I have are not inkjet printable like on this photo)

I hope that in these old days of 4x certified DVD's the bonding of TY was still good !
Last edited by frank1 on Sat Oct 21, 2006 1:52 am, edited 1 time in total.
User avatar
frank1
CD-RW Player
 
Posts: 334
Joined: Sat Jan 22, 2005 6:59 am

Postby Justin42 on Fri Oct 20, 2006 10:32 pm

Hrrrm, not sure. I know the Maxell 4X DVD-R (not+R, like you have) TY Bonding sucks. Strangely, no other brand seemed to have that problem, but I've read a lot of problems (Search around these forums) that Maxell's batches of TY had some issues.

I have no idea about the DVD+R variant, though.
Justin42
CD-RW Player
 
Posts: 723
Joined: Sat Jun 29, 2002 10:30 pm

Postby RJW on Sat Oct 21, 2006 5:51 pm

MonsterMan wrote:It was bonded to the disc pretty good, too. So I don't think it just got "stuck" during packaging.


Hmm maybe then they finally fixed the bonding issue ? Oh now that one is pure random so the bonding was good in this case but just a even more crazy screw-up.
:lol:
SkaarjMaster wrote:
dolphinius_rex wrote:
SkaarjMaster wrote:Are the TY CD-Rs still good? Is it just the 8X DVD-Rs single layer from them? :o


I've seen a lot more defects on TY CD-Rs lately as well, but nothing NEARLY as bad as with the DVDRs. I would say all Taiyo Yuden DVD±R media is affected though.


In that case, I'm glad I still have a 100 CD-R spindle in a half of the 1160s from last year still handy. If the CD-Rs are that bad, I may be buying Verbatim when I run out. Of course, I'll come back here and check again when it's time.;) Thanks man! :D

I've seen TY cd-r's with problems luckilly not much and it was solved out nicely. However I have to say I still will recommend TY over verbatim cd-r's based on the testing data. It seems that there is no good replacement for TY cd-r's. So let's hope they don't fuck these up to much.

frank1 wrote:I hope that in these old days of 4x certified DVD's the bonding of TY was still good !


No TY's bonding problems with DVD media go back to 1x dvd-r and why they did slightly improve things the problem still is there.

Also that fuji disc that splitted in my case when taking it out of the case was a 4x TY DVD-R disc. So 4x media is not more safe. But so far I did have more luck with bonding of 4x +R media but also there the problem exists based on multiple brands and unbranded media.

Justin42 wrote:Hrrrm, not sure. I know the Maxell 4X DVD-R (not+R, like you have) TY Bonding sucks. Strangely, no other brand seemed to have that problem, but I've read a lot of problems (Search around these forums) that Maxell's batches of TY had some issues.

Like I said earlier and I think it's infamous in the community I had a FUJI 4x DVD-R splitting. I can say that the problem seems to exists with all TY media.
Trying to make something "foolproof" only forces nature to make a better fool.
RJW
CD-RW Player
 
Posts: 1379
Joined: Sun Oct 28, 2001 8:00 pm
Location: The netherlands

Postby Scour on Sat Oct 21, 2006 8:41 pm

lordyu wrote:1. Discs with S/N like PAH637JA31035535 6 are made by CMC in Taiwan for Verbatim, CMC.

2. Discs with S/N like 4254F1213-04308C10 (- or +) are made by Prodisc in ??? for Verbatim, ???.

3. Discs with S/N like 5007 512 -R C B 10930 (-R or +R) are made by Moser Baer in India for Verbatim, ???.


Thnaks for info, so my HP DVD+R 16x from CMC

My Verbatim DVD-R 16x have SN: MAP633JD24202723 4

Any idea´s, also from CMC?
Benq DW 1640 and 1650 , Plextor PX-755, Pioneer BDR-208 and 209D, LG GH24NSC0, LG BH16NS40 and 16NS55, Liteon ihas 124F and 324F, Pioneer DVR-215 and S21, Samsung SH-224DB and 224GB, and some more

cu
Scour
Scour
CD-RW Player
 
Posts: 1933
Joined: Wed Nov 07, 2001 8:00 pm
Location: Germany

Postby Gen-An on Sat Oct 21, 2006 10:06 pm

Scour wrote:Thnaks for info, so my HP DVD+R 16x from CMC

My Verbatim DVD-R 16x have SN: MAP633JD24202723 4

Any idea´s, also from CMC?


That is correct. Much of the Verbatim media is made by CMC.
Gen-An
CD-RW Player
 
Posts: 314
Joined: Thu Jun 17, 2004 6:20 pm

Postby dolphinius_rex on Sun Oct 22, 2006 2:15 am

Gen-An wrote:
Scour wrote:Thnaks for info, so my HP DVD+R 16x from CMC

My Verbatim DVD-R 16x have SN: MAP633JD24202723 4

Any idea´s, also from CMC?


That is correct. Much of the Verbatim media is made by CMC.


Or rather, it WAS. It's more MBIL now.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby Gen-An on Mon Oct 23, 2006 10:09 am

dolphinius_rex wrote:
Gen-An wrote:
Scour wrote:Thnaks for info, so my HP DVD+R 16x from CMC

My Verbatim DVD-R 16x have SN: MAP633JD24202723 4

Any idea´s, also from CMC?


That is correct. Much of the Verbatim media is made by CMC.


Or rather, it WAS. It's more MBIL now.


I still haven't seen any MBIL Verbatim media in the US. Still mostly CMC and Prodisc around here where I am.
Gen-An
CD-RW Player
 
Posts: 314
Joined: Thu Jun 17, 2004 6:20 pm

Postby dolphinius_rex on Mon Oct 23, 2006 12:02 pm

Gen-An wrote:
dolphinius_rex wrote:
Gen-An wrote:
Scour wrote:Thnaks for info, so my HP DVD+R 16x from CMC

My Verbatim DVD-R 16x have SN: MAP633JD24202723 4

Any idea´s, also from CMC?


That is correct. Much of the Verbatim media is made by CMC.


Or rather, it WAS. It's more MBIL now.


I still haven't seen any MBIL Verbatim media in the US. Still mostly CMC and Prodisc around here where I am.


DatalifePlus CD-Rs is all made by MBIL right now, none of it is Prodisc, and CMC can't make it because of licensing issues. As for DVDR media, CMC is used much less for manufacturing for several reasons. Prodisc again can't be used because of licensing issues. So again MBIL is getting the orders.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby Scour on Mon Oct 23, 2006 12:21 pm

ok, Thanks
Benq DW 1640 and 1650 , Plextor PX-755, Pioneer BDR-208 and 209D, LG GH24NSC0, LG BH16NS40 and 16NS55, Liteon ihas 124F and 324F, Pioneer DVR-215 and S21, Samsung SH-224DB and 224GB, and some more

cu
Scour
Scour
CD-RW Player
 
Posts: 1933
Joined: Wed Nov 07, 2001 8:00 pm
Location: Germany

Postby SkaarjMaster on Mon Oct 23, 2006 7:58 pm

Is MBIL good or bad for Verbatim and us?
MSI (unnamed laptop): GS75 Stealth 95F, Pioneer BDR-XD07B
SKAARJ-LAPTOP: Asus G750JW-NH71
SKAARJMASTERDUO: WinXPSP3,C2D E8600,Gigabyte EP45-UD3P,Pioneer DVR-216D,BenQ DW1655,Asus E818A3T.
User avatar
SkaarjMaster
CD-RW Player
 
Posts: 515
Joined: Thu Dec 11, 2003 1:06 pm
Location: Sarasota, Florida USA

Postby dolphinius_rex on Tue Oct 24, 2006 1:46 am

SkaarjMaster wrote:Is MBIL good or bad for Verbatim and us?


Well, I think they're better then Prodisc.... but I don't have much experience with them yet, so right now I have a hard time answering that.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby RJW on Tue Oct 24, 2006 4:18 am

I would say worse as CMC but better as Prodisc at the moment.
Trying to make something "foolproof" only forces nature to make a better fool.
RJW
CD-RW Player
 
Posts: 1379
Joined: Sun Oct 28, 2001 8:00 pm
Location: The netherlands

Postby Grain on Tue Oct 24, 2006 1:31 pm

Are MBIL Verbatim DVD's identifiable in anyway in the store? ie font on the cakebox like CMC's & Prodiscs are?
Hi-Def Format Neutral
Samsung BD-1400, PS3 40GB
Toshiba HD-A2, HD-XA2 & XBox 360 HD DVD
Grain
CD-RW Player
 
Posts: 479
Joined: Sat Oct 29, 2005 12:12 am
Location: Canada

Postby dolphinius_rex on Tue Oct 24, 2006 1:43 pm

Grain wrote:Are MBIL Verbatim DVD's identifiable in anyway in the store? ie font on the cakebox like CMC's & Prodiscs are?


The packaging will say "made in India" :D
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby Grain on Tue Oct 24, 2006 3:33 pm

Excellent, thanks Dolph. Can buy CMC Verbs with confidance now. Future Shop has 100 disc spindles of 16X +/- Verbs for $29.99CAD, last batch I got was CMC, hopefully they still are.
Hi-Def Format Neutral
Samsung BD-1400, PS3 40GB
Toshiba HD-A2, HD-XA2 & XBox 360 HD DVD
Grain
CD-RW Player
 
Posts: 479
Joined: Sat Oct 29, 2005 12:12 am
Location: Canada

Next

Return to Recordable Media Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

All Content is Copyright (c) 2001-2024 CDRLabs Inc.