Home News Reviews Forums Shop


Nero version: 6.6.0.5 bug, this is getting old fast

Nero Burning ROM, Nero Express, NeroVision Express, Recode, InCD, etc..

Nero version: 6.6.0.5 bug, this is getting old fast

Postby wonderwrench on Thu Jan 13, 2005 7:19 pm

Cannot write track at correct position with this recorder.

When I try to burn a dvd +/- r/rw disk from an image file on my hard drive it's a no go. NBR 6.6.0.5 and my plextor burner must not like each other. Burns fine using the same image with 6.6.0.1 . Log file below.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.5
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.00 - HA 0 TA 1 - 6.6.0.5
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW-F1E >Version: 1.0g - HA 0 TA 0 - 6.6.0.5
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA3 atapi Port 1 ID 0 DMA: On
: epstw2k Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
YAMAHA CRW-F1E F: CDRom0
PLEXTOR DVDR PX-716A G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 720MB (737440kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.1.2005
Burn DVD Image
6:22:16 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

6:22:16 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 4676988928
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:27.11 ( 2283536) RecDep=0x00
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\Temp\Images and Words.nrg>

6:22:16 PM #3 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using media

6:22:16 PM #4 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283535 (507:27.10, 4460MB)

6:22:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

6:22:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

6:22:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:22:16 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283536 (2283536) = #2283536/507:27.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283536 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

6:22:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4676988928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
150 | 1 | 1 | 0x41 | 0x00
2283686 | lead-out | 1 | 0x41 | 0x00

6:22:16 PM #10 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

6:22:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2598
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): target disc position #150 differs

6:22:16 PM #12 TRANSFER -30 File ThreadedTransferInterface.cpp, Line 2599
Cannot write track at correct position with this recorder

6:22:16 PM #13 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Back to NBR 6.6.0.1 and NVE 3.0.1.4 . Not perfect but they work for me.
wonderwrench
Buffer Underrun
 
Posts: 30
Joined: Wed Aug 06, 2003 12:53 pm

Postby CCampbell on Mon Jan 17, 2005 2:46 pm

Can you include a log file from Nero 6.6.0.1, so that we can see what is going on here, and so that I can pass this information onto our Engineers?

I have this model Plextor recorder, but could not duplicate the issue with an Image file I had created.

Regards

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby wonderwrench on Mon Jan 17, 2005 9:46 pm

CCampbell wrote:Can you include a log file from Nero 6.6.0.1, so that we can see what is going on here, and so that I can pass this information onto our Engineers?

I have this model Plextor recorder, but could not duplicate the issue with an Image file I had created.

Regards

Craig


I do not have the exact image file any longer so it may not be a good test.
Or do you just need a log file from 6.6.0.1 when burning from a image file?
I can recreate an image from the same source and them burn it with nero 6.6.0.1 if that would be good enough?
wonderwrench
Buffer Underrun
 
Posts: 30
Joined: Wed Aug 06, 2003 12:53 pm

Postby CCampbell on Tue Jan 18, 2005 2:53 pm

Actually, if you do not mind, I would like to know if you see this issue with the new Nero 6.6.0.6 just posted on our website.

I have log files from Nero 6.6.0.1 burning Image files. What I had wanted to compare was Nero 6.6.0.1 and Nero 6.6.0.5 log files buring the same image file, so I can see what each was reporting for the same log file.

But if Nero 6.6.0.6 resolves the issue, then I would not need any log files, we would just consider the issue resolved.

Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby wonderwrench on Tue Jan 18, 2005 11:44 pm

Well sorry to say but 6.6.0.6 has the same problem as 6.6.0.5
I made a new image using Recode from NVE3014 and this image was used for both burns. File size 4.35 GB (4,676,989,084 bytes).
Log files below. I found a firmware update for my plextor PX-716A, ver 1.03 (had 1.00) so I updated but still no joy.

Note: both 6.6.0.5 and 6.6.0.6 burning rom also have problems remembering screen size settings. They will not remember a full screen setting and you must click the maximize twice to get any results.

Log 6.6.0.1 completed burn

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.03 - HA 0 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW-F1E >Version: 1.0g - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA3 atapi Port 1 ID 0 DMA: On
: epstw2k Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
YAMAHA CRW-F1E F: CDRom0
PLEXTOR DVDR PX-716A G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 658MB (673936kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.1.2005
Burn DVD Image
8:20:06 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

8:20:06 PM #2 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

8:20:06 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 382021632
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=507:27.11 ( 2283536)
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\Temp\DT2.nrg>

8:20:06 PM #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using media

8:20:07 PM #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283535 (507:27.10, 4460MB)

8:20:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

8:20:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

8:20:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:20:07 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283536 (2283536) = #2283536/507:27.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283536 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

8:20:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676681728, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2283536 | lead-out | 1 | 0x00 | 0x41

8:20:07 PM #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

8:20:07 PM #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

8:20:07 PM #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

8:20:07 PM #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 8x (11,080 KB/s)

8:20:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:20:07 PM #16 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

8:20:07 PM #17 Text 0 File DVDR.cpp, Line 4936
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0

8:20:07 PM #18 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM

8:20:07 PM #19 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 7:10,868 (430868ms) -> OK

8:20:07 PM #20 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: No

8:20:09 PM #21 Text 0 File Cdrdrv.cpp, Line 1284
20:20:09.718 - PLEXTOR DVDR PX-716A\H0 T1 : Queue again later

8:27:56 PM #22 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 2283536 (22D810h), lenght 0 blocks

8:27:56 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:28:13 PM #24 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

8:28:13 PM #25 Text 0 File DVDR.cpp, Line 4936
Drive: PLEXTOR DVDR PX-716A
Book Type request: DVD+R
Changing the Book Type was finished successfully, return code 0

8:28:13 PM #26 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

8:28:13 PM #27 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

---------------------------------------------------------------------------------

Log 6.6.0.6 failed burn

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW-F1E >Version: 1.0g - HA 0 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JB-00DUA3 atapi Port 1 ID 0 DMA: On
: epstw2k Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
YAMAHA CRW-F1E F: CDRom0
PLEXTOR DVDR PX-716A G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 680MB (696648kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.1.2005
Burn DVD Image
7:58:44 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

7:58:44 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 4676988928
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:27.11 ( 2283536) RecDep=0x00
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\Temp\DT2.nrg>

7:58:44 PM #3 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using media

7:58:44 PM #4 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283685 (507:29.10, 4460MB)

7:58:44 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

7:58:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

7:58:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:58:44 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283536 (2283536) = #2283536/507:27.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283536 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

7:58:44 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4676988928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
150 | 1 | 1 | 0x41 | 0x00
2283686 | lead-out | 1 | 0x41 | 0x00

7:58:44 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:58:44 PM #11 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

7:58:44 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:58:44 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

7:58:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2598
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): target disc position #150 differs

7:58:44 PM #15 TRANSFER -30 File ThreadedTransferInterface.cpp, Line 2599
Cannot write track at correct position with this recorder

7:58:44 PM #16 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Thanks for your time
wonderwrench
Buffer Underrun
 
Posts: 30
Joined: Wed Aug 06, 2003 12:53 pm

Postby CCampbell on Wed Jan 19, 2005 7:42 pm

Ok, I need to generate a bug report on this issue.

I need step by step details on how you created the image file.

Did you create the Image file using Nero Vision, or Nero Recode?

And what was the source files? AVI, MPEG, or VOB?

And then after you had the DVD Image File, you then used Nero to 'Burn Image file to disc', correct?

I need exact details to re-create the issue. I have the log files here, which are a great help already.

Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Same problem with NEC ND2100AD on a Dell

Postby mirekc on Thu Jan 20, 2005 12:22 am

I transferred two DV tapes using IEEE1394 creating 23GByte avi file. Using Nero Vision Express3 I converted that file to a 4.4 GByte .nrg image. When trying to burn it, I get the message "Cannot write track at correct position with this recorder".
Mirek
mirekc
Buffer Underrun
 
Posts: 1
Joined: Thu Jan 20, 2005 12:15 am

Postby CCampbell on Thu Jan 20, 2005 12:37 pm

Perfect.

Thanks Mirek.

I'm creating the bug entry now.

Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby wonderwrench on Thu Jan 20, 2005 6:44 pm

Ok, I need to generate a bug report on this issue.

I need step by step details on how you created the image file.

Did you create the Image file using Nero Vision, or Nero Recode? <recode>

And what was the source files? AVI, MPEG, or VOB? <VOB>

And then after you had the DVD Image File, you then used Nero to 'Burn Image file to disc', correct? <yes I used nero to burn image to disc>

I need exact details to re-create the issue. I have the log files here, which are a great help already.

Regards,

Craig
wonderwrench
Buffer Underrun
 
Posts: 30
Joined: Wed Aug 06, 2003 12:53 pm

Postby CCampbell on Mon Jan 24, 2005 4:08 pm

Looks like this bug was already reported by one of our Tech's, and has been looked into and addressed. The new version of Nero 6.6x to be posted at the end of the month should address this issue.

Regards,

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA


Return to Nero (Formerly Ahead Software)

Who is online

Users browsing this forum: Majestic-12 [Bot] and 0 guests

All Content is Copyright (c) 2001-2018 CDRLabs Inc.