ETP wrote:Ian, My bios does not have that selection, only the drive on or off and no IDE bios settings. I am now in umda 4 for the pio and mode 2 for the 3530. I had to set the pio as master.
Download the 109v1.50 firmware from http://www.pioneer-eur.com/eur/download ... W150EU.EXE
Extract the files and delete the Pioneer upgrade (UPGR109.exe). You will be left with 2 files, R9100009.150 & R9100109.150.
Download DVRupdate 0.9 from
http://www.dvd-recordable.org/wwwimgs/m ... 20v0.9.zip
Extract DVRupdate 0.9.exe to the same folder as the 2 files above.
Run DVRupdate 0.9 and do the following:
1) Select your drive from the 'Device' drop down box
2) Select the Kernel file by clicking the folder icon to the right of the 'Kernel' field. The correct file will automatically be selected if you have run DVRupdate from the same folder as the R9100009.150 & R9100109.150 files.
3) Select the Normal file by clicking the folder icon to the right of the 'Normal' field. The correct file will automatically be selected if you have run DVRupdate from the same folder as the R9100009.150 & R9100109.150 files.
4) Click 'Start'
The operation takes about a minute. Exit DVRupdate.
Ian wrote:Earl, you have it connected to the onboard IDE controller, right? Do you have it set right in the BIOS (auto detect or cdrom)?
Users browsing this forum: No registered users and 1 guest
|All Content is Copyright (c) 2001-2016 CDRLabs Inc.|