Autoexec.bat:
===============================================
@echo off
SET TZ=GHO+05:00
Autoexec.bat:
LH \MSCDEX.EXE /D:cd1 /D:cd2 /D:cd3
A:\mouse.com
echo Loading...
cls
if %config% == FROMFLPY goto FLPYBOOT
if %config% == FROMCD goto CDBOOT
goto FAILED
:FLPYBOOT
echo Loading Ghost boot disk (containing Ghost.exe)
pause
if exist a:\ghost\ghost.exe goto GHOSTFND
goto FLPYBOOT
:CDBOOT
echo Loading Ghost boot disk (containing Ghost.exe)
pause
if not exist a:\ghost\ghost.exe goto CDBOOT
a:
goto GHOSTFND
:GHOSTFND
cd \ghost
echo Loading...
GHOST.EXE
goto END
:FAILED
echo Unknown boot menu selection
goto END
:END
===============================================
Config.sys:
===============================================
[menu]
menuitem=FROMFLPY, This computer was started from a Ghost boot disk
menuitem=FROMCD, This computer was started from a Ghost bootable CD
[FROMFLPY]
[FROMCD]
[COMMON]
DEVICE = oakcdrom.sys /D:cd1
DEVICE = btdosm.sys
DEVICE = btcdrom.sys /D:cd2
DEVICE = aspicd.sys /D:cd3
LASTDRIVE = Z
===============================================
Other files on Ghost CD Boot Floppy (custom);
Ghost folder w/Ghost.exe
command.com
IFSHLP.SYS
mouse.com
mscdex.exe
oakcdrom.sys
These are all Windows98se MSDOS Boot floppy files.
Autoexec.bat & Config.sys were taken from the Ghost 2003 Boot floppy then edited to make this custom Ghost 2003 CD/DVD Boot floppy disk.
Normally, the Ghost boot wizard requires two floppy disks for this same type of Boot disk. With this, my custom Ghost Boot floppy, when Ghost asks for the Boot Disk, you can use this or you can use this when making a bootable Ghost CDRom using Nero5.
*Note:
I edited config.sys so no matter which menu item you choose (CD or floppy), the boot floppy disk will always be chosen. This is to avoid any drive misconfigurations.
See>>
http://www.techweb.com/winmag/columns/explorer/1999/1025.htm