Home News Reviews Forums Shop


Problems burning DVD+R DL disc

Nero Burning ROM, Nero Express, NeroVision Express, Recode, InCD, etc..

Problems burning DVD+R DL disc

Postby PaulAlex7000 on Sat May 28, 2005 1:13 am

The Nero History Log file is below.

Basically, trying to get a Pioneer A10 to burn data to Verbatim DVD+R DL disc. I thought I was getting farther in it burning a non-multi-session disc, but no dice.

Any ideas on this one? Thanks!

Code: Select all
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder:             <PIONEER DVD-RW  DVR-109> Version: 1.40 - HA 0 TA 0 - 6.6.0.13
Adapter driver:      <atapi>                   HA 0
Drive buffer  :      2000kB
Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <PIONEER  DVD-RW  DVR-109 >Version: 1.40 - HA 0 TA 0 - 6.6.0.13
Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : PIONEER DVD-RW  DVR-109          atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : PLEXTOR CD-R   PX-W2410A         atapi Port 1 ID 0  DMA: On
DiskPeripheral       : WDC WD2000JB-00DUA0     70.1    hpt3xx Port 2 ID 0  DMA: Off
DiskPeripheral       : WDC WD2000JB-00DUA0     70.1    hpt3xx Port 2 ID 1  DMA: Off
OtherPeripheral      : ADAPTEC RCM DEVICE              hpt3xx Port 2 ID 0  DMA: Off
DiskPeripheral       : Promise 1+0 Stripe/RAID01.10  fasttx2k Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW  DVR-109    Y:   CDRom0
PLEXTOR CD-R   PX-W2410A   X:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1048020kB)
Free physical memory: 257MB (263500kB)
Memory in use       : 74
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.5.2005
ISO compilation
9:18:24 AM   #1 Text 0 File Isodoc.cpp, Line 6194
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : FALSE
   Write ISO9660 ;1 file extensions        : TRUE
   
9:18:24 AM   #2 Text 0 File Reader.cpp, Line 127
   Reader running
   
9:18:24 AM   #3 Text 0 File Writer.cpp, Line 122
   Writer PIONEER  DVD-RW  DVR-109  running
   
9:18:24 AM   #4 ISO9660GEN -11 File geniso.cpp, Line 3293
   First writeable address = 0 (0x00000000)
   
9:18:29 AM   #5 Text 0 File Burncd.cpp, Line 3167
   Turn on Disc-At-Once, using DVD media
   
9:18:30 AM   #6 Text 0 File DlgWaitCD.cpp, Line 260
   Last possible write address on media:  4173823 (927:30.73, 8151MB)
   Last address to be written:            4041823 (898:10.73, 7894MB)
   
9:18:30 AM   #7 Text 0 File DlgWaitCD.cpp, Line 272
   Write in overburning mode: NO (enabled: CD)
   
9:18:30 AM   #8 Text 0 File DlgWaitCD.cpp, Line 2339
   Recorder: PIONEER DVD-RW  DVR-109, Media type: DVD+R9 Double Layer
    Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 0
   
9:18:30 AM   #9 Text 0 File DlgWaitCD.cpp, Line 438
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
9:18:30 AM   #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 4041824 (4041824) = #4041824/898:10.74
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4041824 blocks [PIONEER  DVD-RW  DVR-109]
   --------------------------------------------------------------
   
9:18:30 AM   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
   Prepare recorder [PIONEER  DVD-RW  DVR-109] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8277655552, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    4041824 | lead-out |   1 |    0x41 | 0x00
   
9:18:30 AM   #12 Phase 24 File dlgbrnst.cpp, Line 1832
   Caching of files started
   
9:19:13 AM   #13 Text 0 File Burncd.cpp, Line 4051
   Cache writing successful.
   
9:19:13 AM   #14 Phase 25 File dlgbrnst.cpp, Line 1832
   Caching of files completed
   
9:19:13 AM   #15 Phase 36 File dlgbrnst.cpp, Line 1832
   Burn process started at 2.4x (3,324 KB/s)
   
9:19:14 AM   #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
9:19:14 AM   #17 Text 0 File DVDPlusDualLayer.cpp, Line 430
   Disc finalized, LBA total Image size: 4041824 (7894MB), Last LBA L0: 2020927 (3947MB)
   
9:19:37 AM   #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
   SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C320600
   Status:     0x04 (0x01, SCSI_ERR)
   HA-Status   0x00 (0x00, OK)
   TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
   Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
   Sense Code: 0x24
   Sense Qual: 0x00
   CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00
   Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
               0x00 0x00 0x00 0x00 0x24 0x00
   
9:19:37 AM   #19 Text 0 File DVDPlusDualLayer.cpp, Line 519
   L0 Data Zone Capacity set to 2020928 (1ED640h, 3947MB) -> OK, confirmed setting
   
9:19:37 AM   #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 544
   Burning Layer 1
   
9:19:37 AM   #21 Text 0 File DVDPlusDualLayer.cpp, Line 552
   Start writing layer 1 at address 0 (0h)
   
9:19:37 AM   #22 Text 0 File Cdrdrv.cpp, Line 8438
   ---- DVD Structure: Physical Format Information (00h) ----
   Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R DL (14), Part Version: 1
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 2,    Track Path: Opposite Track Path (OTP),  Layer Type: recordable
    Linear Density:         0,293 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      FCFFFF h
    End Sector Number in Layer 0:                 21D63F h (LBN: 1ED63F h, 3947 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Disc Application Code: 0 / 0 h
     Extended Information indicators: 0 h
     Disc Manufacturer ID: MKM.....
     Media type ID: 001
     Product revision number: 0
     Number of Physical format information bytes in use in ADIP up to byte 63: 64
    Media Specific [16..63]:
         00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40    ...MKM.....001.@
         25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14    %7../c./c!#....
         02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00    .....!#.........
   
9:19:37 AM   #23 Text 0 File DVDPlusRW.cpp, Line 652
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
9:19:40 AM   #24 Text 0 File Cdrdrv.cpp, Line 1288
   09:19:40.984 - PIONEER DVD-RW  DVR-109\H0 T0 : Queue again later
   
9:19:41 AM   #25 Text 0 File Cdrdrv.cpp, Line 1288
   09:19:41.796 - PIONEER DVD-RW  DVR-109\H0 T0 : Queue again later
   
9:19:42 AM   #26 Text 0 File Cdrdrv.cpp, Line 1288
   09:19:42.609 - PIONEER DVD-RW  DVR-109\H0 T0 : Queue again later
   
9:19:43 AM   #27 Text 0 File Cdrdrv.cpp, Line 1288
   09:19:43.234 - PIONEER DVD-RW  DVR-109\H0 T0 : Queue again later
   
9:21:21 AM   #28 SCSI -1135 File Cdrdrv.cpp, Line 1436
   SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03E60000
   Status:     0x04 (0x01, SCSI_ERR)
   HA-Status   0x00 (0x00, OK)
   TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
   Sense Key:  0x03 (KEY_MEDIUM_ERROR)
   Sense Code: 0x0C
   Sense Qual: 0x00
   CDB Data:   0x2A 0x00 0x00 0x02 0x78 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
   Sense Data: 0x71 0x00 0x03 0x00 0x02 0x75 0xF0 0x0E
               0x00 0x00 0x00 0x00 0x0C 0x00
   
9:21:21 AM   #29 CDR -1135 File Writer.cpp, Line 311
   Write error
   
9:21:21 AM   #30 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
9:21:21 AM   #31 Text 0 File ThreadedTransfer.cpp, Line 222
   conversion idle, stopping reader
   
9:21:26 AM   #32 Phase 127 File dlgbrnst.cpp, Line 1832
   Generating DVD high compatibility borders
   
9:21:46 AM   #33 CDR -1122 File WriterStatus.cpp, Line 167
   Unable to recover TOC
   
9:21:46 AM   #34 TRANSFER -24 File WriterStatus.cpp, Line 167
   Could not perform end of Disc-at-once
   
9:21:46 AM   #35 Phase 38 File dlgbrnst.cpp, Line 1832
   Burn process failed at 2.4x (3,324 KB/s)
   

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
PaulAlex7000
Buffer Underrun
 
Posts: 14
Joined: Wed May 25, 2005 3:26 pm

Postby Bhairav on Sat May 28, 2005 2:24 am

Why is DMA off on your HDDs? Enable DMA.. pretty sure that's your problem.
Q6600@3.1Ghz | Asus P5Q-E | 4GB DDR2-800 | 8800GT | 4TB HDD | Viewsonic vx2025wm
Xonar DX | Pioneer DVR-212 | Pioneer 111L | Benq 1655
User avatar
Bhairav
CD-RW Player
 
Posts: 1239
Joined: Mon Jul 22, 2002 5:44 am
Location: Bombay,India

Postby PaulAlex7000 on Sat May 28, 2005 3:03 am

Bhairav wrote:Why is DMA off on your HDDs? Enable DMA.. pretty sure that's your problem.


I'm not sure how to enable it -- the hard drives in question are connected to an Adaptec 1200 RAID IDE card. And neither the "SCSI" device or the disk drives themselves in the Device Manager give an option for DMA.
PaulAlex7000
Buffer Underrun
 
Posts: 14
Joined: Wed May 25, 2005 3:26 pm

Postby Boba_Fett on Mon May 30, 2005 3:20 pm

PaulAlex7000 wrote:
Bhairav wrote:Why is DMA off on your HDDs? Enable DMA.. pretty sure that's your problem.


I'm not sure how to enable it -- the hard drives in question are connected to an Adaptec 1200 RAID IDE card. And neither the "SCSI" device or the disk drives themselves in the Device Manager give an option for DMA.


With non-native HDD methods (PCI cards, 3rd party chips not integreted into the mobo's Southbridge), Windows always recognizes optical and hard drives as SCSI. I have no clue as to whether there is a performance hit there since you don't have any DMA options...
eVGA NF4 SLI mobo
Opteron 165 Dual Core 1MB cache @ 2.5ghz
2GB Mushkin DDR PC4000
2x160GB & 1x250GB 7,200RPM SATA w/NCQ
eVGA Geforce 7900 GTO 512MB PCI-e
Pioneer 111D 16x DVD burner
Onboard Sound :(
User avatar
Boba_Fett
CD-RW Player
 
Posts: 401
Joined: Wed Dec 18, 2002 8:06 pm
Location: Middle of Nowhere

Postby PaulAlex7000 on Tue May 31, 2005 11:41 pm

Boba_Fett wrote:
PaulAlex7000 wrote:
Bhairav wrote:Why is DMA off on your HDDs? Enable DMA.. pretty sure that's your problem.


I'm not sure how to enable it -- the hard drives in question are connected to an Adaptec 1200 RAID IDE card. And neither the "SCSI" device or the disk drives themselves in the Device Manager give an option for DMA.


With non-native HDD methods (PCI cards, 3rd party chips not integreted into the mobo's Southbridge), Windows always recognizes optical and hard drives as SCSI. I have no clue as to whether there is a performance hit there since you don't have any DMA options...


Come to think of it, if it was an issue with DMA, shouldn't I be seeing problems when it comes to burning a single layer DVD+R disc. Or DVD-RW (in ISO format, not UDF).

I'm not good at reading the Nero error logs, but it seems it's having an issue with the second layer?
PaulAlex7000
Buffer Underrun
 
Posts: 14
Joined: Wed May 25, 2005 3:26 pm

Postby dodecahedron on Wed Jun 01, 2005 1:59 am

PaulAlex7000 wrote:Come to think of it, if it was an issue with DMA, shouldn't I be seeing problems when it comes to burning a single layer DVD+R disc. Or DVD-RW (in ISO format, not UDF).

probably, if you were burning at 8x.

did you try Nero InfoTool (Configuration tab) ?
what does it say about DMA mode of the drives attached to the Adaptec IDE card ?
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the land of Mordor, where the Shadows lie
-- JRRT
M.C. Escher - Reptilien
User avatar
dodecahedron
DVD Polygon
 
Posts: 6865
Joined: Sat Mar 09, 2002 12:04 am
Location: Israel

Postby unclebud on Wed Jun 01, 2005 9:30 pm

my sympathies to op
User avatar
unclebud
CD-RW Thug
 
Posts: 86
Joined: Wed Nov 21, 2001 8:00 pm
Location: texas

Postby PaulAlex7000 on Thu Jun 02, 2005 5:40 am

dodecahedron wrote:
PaulAlex7000 wrote:Come to think of it, if it was an issue with DMA, shouldn't I be seeing problems when it comes to burning a single layer DVD+R disc. Or DVD-RW (in ISO format, not UDF).

probably, if you were burning at 8x.


I was burning the DVD+R discs at 4x, so probably no chance of buffer underrun.

The Verbatim DL disc I was attempting to burn at 2.4x.

dodecahedron wrote:did you try Nero InfoTool (Configuration tab) ?
what does it say about DMA mode of the drives attached to the Adaptec IDE card ?


I launched it, and it did not say either way (DMA on or off) about the hard drives attached to the Adaptec card. It did say that DMA was on for both my Plextor CD and Pioneer DVD burner.

For what it's worth, looks like the Adaptec 1200A uses the Highpoint chipset, since the drivers being used are hpt3xx.sys.

Plextor is master on primary, and Pioneer is master on secondary channel (the main hard drive -- with the OS -- being a SATA drive attached to a Promise onboard controller).
PaulAlex7000
Buffer Underrun
 
Posts: 14
Joined: Wed May 25, 2005 3:26 pm

Postby CCampbell on Fri Jun 03, 2005 1:48 pm

The log file shows three errors.

THe first one comes as soon as it looks at the media, and reports a "KEY_ILLEGAL_REQUEST". And then it moves on and when our software issues it's first 'WRITE' command, the Recorder reports a 'Queue Again Later' error message, which means the recorder is busy and not accepting commands. It never recovers from being busy, so it's not accepting commands, and it times out with the "KEY_MEDIUM_EOR" message.

Do you have the latest firmware for your recorder? Have you tried different DVD DL media?

Regards

Craig
CCampbell
CD-RW Player
 
Posts: 966
Joined: Tue Jan 29, 2002 9:27 pm
Location: Glendale, CA

Postby PaulAlex7000 on Fri Jun 03, 2005 6:30 pm

CCampbell wrote:The log file shows three errors.

THe first one comes as soon as it looks at the media, and reports a "KEY_ILLEGAL_REQUEST". And then it moves on and when our software issues it's first 'WRITE' command, the Recorder reports a 'Queue Again Later' error message, which means the recorder is busy and not accepting commands. It never recovers from being busy, so it's not accepting commands, and it times out with the "KEY_MEDIUM_EOR" message.

Do you have the latest firmware for your recorder? Have you tried different DVD DL media?


Hi Craig... I'm using firmware 1.5 (the newest), but had originally tried it on firmware 1.40.

I haven't tried any other DL media yet. What I'm using presently is the Verbatim 2.4x DL, purchased at CompUSA. And I bought two more 3-packs from Newegg.com, which I haven't tried yet.

I jumped the gun by buying this many Verbatim media because so many people said they didn't have any problems with Verbatim, and it's the only supported media by Pioneer that will burn at 6x DL (although I haven't tried that fast of a speed yet).
PaulAlex7000
Buffer Underrun
 
Posts: 14
Joined: Wed May 25, 2005 3:26 pm


Return to Nero (Formerly Ahead Software)

Who is online

Users browsing this forum: No registered users and 1 guest

All Content is Copyright (c) 2001-2017 CDRLabs Inc.