Home News Reviews Forums Shop


Official K-Probe Discussion (Tool for Scanning C1C2/PIPO)

General discussion about recordable CD, DVD and BD media and write quality testing.

Postby rdgrimes on Tue Jul 08, 2003 2:44 pm

Has anybody tried setting v1.1.14 to 9x to see if it defaults to a correct 8x?
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby cfitz on Tue Jul 08, 2003 2:53 pm

I had to bump 1.1.14 up to 10x before it would shift gears to a true 8x on my LTR-48246S.

cfitz
cfitz
CD-RW Curmudgeon
 
Posts: 4572
Joined: Sat Jul 27, 2002 10:44 am

Postby cfitz on Tue Jul 08, 2003 3:33 pm

I got a copy of 1.1.13, and it also is testing slower than the configured speed (i.e. it tests at 4x when you configure it to test at 8x). Thus, it appears that the bug was introduced in version 1.1.13 (which was a rather short-lived version anyway).

I will edit my previous post to reflect this update.

cfitz
cfitz
CD-RW Curmudgeon
 
Posts: 4572
Joined: Sat Jul 27, 2002 10:44 am

Postby dolphinius_rex on Tue Jul 08, 2003 4:54 pm

how come it won't allow for 1x reading? I know that Alcohol 120% has been known to slow down to 1x for reading really bad discs, why can't this be done for K-Probe?
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby rdgrimes on Tue Jul 08, 2003 6:23 pm

The only time I've seen read speeds below 4x on a LiteOn is when it was re-reading errors, so it was (I presume), re-reading at 4x with a output speed if 1-2x. The drives do not slow or re-read in KProbe, they skip ahead.
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Kprobe has been updated:

Postby rdgrimes on Wed Jul 09, 2003 9:21 am

Version 1.1.16 now available:

Release notes
KProbe :
1.Support save read buffer data
2.Update media manufacturer information
3.Fix bug : Speed error when running PI/PO
4.Fix bug : Disc size error where running C1/C2 on formatted disc

Install version:
http://upload.cdfreaks.com/Kprobe/kpsetup.exe

Update version:
http://upload.cdfreaks.com/Kprobe/kprobe.zip
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

MInfo updated:

Postby rdgrimes on Wed Jul 09, 2003 9:22 am

New version of MInfo released today:

Version 1.5
Release notes:
MInfo:
1.Add DVD+R/+RW manufacturer
2.Update media manufacturer information

Get it here:
http://upload.cdfreaks.com/Kprobe/MInfo.zip
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby dolphinius_rex on Wed Jul 09, 2003 11:27 am

Woohoo! thanks for updates! :D
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby rdgrimes on Wed Jul 09, 2003 11:51 am

Now, who's going to go back and re-time the reading scans to see if it's fixed?
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby dolphinius_rex on Wed Jul 09, 2003 1:23 pm

I'm busy writing a new review, so I'm out of the game for a little while. I can do some timing later maybe, but this review is a little time sensitive.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby rdgrimes on Wed Jul 09, 2003 1:41 pm

I've got it running now, will edit with full results later, but 8x was about 11 min, so it looks to be fixed.
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby MediumRare on Wed Jul 09, 2003 2:00 pm

rdgrimes: Thank you for the notification. Have you been in touch with Karr Wang on other topics too? Any information on what is saved from the "Raw CMD" panel?

The new KProbe seems to be buggy. The length isn't being recognized correctly and the program hangs once the LBA exceeds the written portion. An (imprecise) comparison with V1.1.12 @40x indicates that the read speed is being set correctly, however (ca. same scan time up to data end).

G
User avatar
MediumRare
CD-RW Translator
 
Posts: 1768
Joined: Sun Jan 19, 2003 3:08 pm
Location: ffm

Postby rdgrimes on Wed Jul 09, 2003 2:09 pm

1.1.16 is working well here:

KProbe scanning times:
Version 1.1.16, 700MB CDR, LTR-52327S
Starting when "testing" appears in the status bar.
8X - 11min
12x - 6:40 min
24x - 4:50 min
32x - 3:30 min
40x - 2:45 min
48x - 2:15 min
Max - 2:05 min

Based on the times, it appears to be switching to P-CAV at 23x and CAV at 48x, so all is well.
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby Halc on Wed Jul 09, 2003 2:39 pm

KProbe 1.1.16 scanning a full 700Mb disc on LiteOn 48246s at 24x took: 4:50 (out of which 10 seconds was taken for starting up the scan)

The same disc scanned at 10-24x CAV on Plextor Premium was: 4:39 (out of which 10 secs was for setting up the scan)

The same disc scanned with Kprobe 1.1.14 at 32x setting (best estimate for real 24x scanning) took 4:48 (10 secs for set up).

Disc size was 79:49:43 (MSF).

Looks about ok.

regards,
Halcy
User avatar
Halc
CD-RW Player
 
Posts: 599
Joined: Mon Feb 04, 2002 9:13 am

Postby MediumRare on Wed Jul 09, 2003 2:43 pm

Have you tried scanning an audio disk that wasn't quite full? I ran into the length recognition problem I mentioned above for both audio disks I've tried with 1.1.16.

G
User avatar
MediumRare
CD-RW Translator
 
Posts: 1768
Joined: Sun Jan 19, 2003 3:08 pm
Location: ffm

Postby rdgrimes on Wed Jul 09, 2003 3:04 pm

Just tried to scan a 62 min audio CDR, with Kprobe set for "disc size". It continued scanning to 63:30 and then froze.

I've Emailed the author about this.
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby dolphinius_rex on Wed Jul 09, 2003 3:47 pm

Check out these two scans done on the same disc. The disc is a E3 Works "Digital Vinyl" CD-R, which I am using in a review that I'm writing. The scans are both done at 40x. The first scan is with K-Probe 1.1.14 and the second is with K-Probe 1.1.16 I did them one after the other with all the same setting, and I double checked Nero Drive Speed and it is set to allow up to maximum (48x) read speeds.

K-Probe Version 1.1.14:
Image

K-Probe Version 1.1.16:
Image

Now the interesting thing, is that all the other CD-Rs of the same media type that I scanned with 1.1.14 produced similar results to the scan above by 1.1.16... so what is different about the disc that causes 1.1.14 to read it differently, how was it fixed???

by the way, I scanned the disc several times with 1.1.14 and it always produces similar results to the above 1.1.14 pic. I'M CONFUSED! :-?
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby Halc on Wed Jul 09, 2003 3:51 pm

Hehe, you are experiencing what I'm experiencing (although I've yet to see that phenomenon across Kprobe versions).

Makes you wonder about readability test accuracy, doesn't it? :)

I'll put more tests later myself.

regards,
Halcyon
User avatar
Halc
CD-RW Player
 
Posts: 599
Joined: Mon Feb 04, 2002 9:13 am

Postby rdgrimes on Wed Jul 09, 2003 4:00 pm

I also saw a couple odd-looking C2's on a disc that was previously free of C2. They were near the same general area, but only with scanning at 40x+.
rdgrimes
CD-RW Player
 
Posts: 963
Joined: Fri Dec 20, 2002 10:27 pm
Location: New Mexico, USA

Postby dodecahedron on Wed Jul 09, 2003 4:17 pm

dolphinius_rex wrote:I'm busy writing a new review ...

congrats on the new site name :D
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the land of Mordor, where the Shadows lie
-- JRRT
M.C. Escher - Reptilien
User avatar
dodecahedron
DVD Polygon
 
Posts: 6865
Joined: Sat Mar 09, 2002 12:04 am
Location: Israel

Postby dodecahedron on Wed Jul 09, 2003 4:20 pm

OK, "bug" found... :wink:
the link Welcome to KProbe still points to the old website, which is now empty...maybe it should point at something at cdfreaks?
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the land of Mordor, where the Shadows lie
-- JRRT
M.C. Escher - Reptilien
User avatar
dodecahedron
DVD Polygon
 
Posts: 6865
Joined: Sat Mar 09, 2002 12:04 am
Location: Israel

Postby dolphinius_rex on Wed Jul 09, 2003 4:43 pm

regarding the scans I just put up, don't worry, the C2 spike is SUPPOSED to be there! The media is unbalanced (I believe) since it is covered in grooves on the top. Remember, this is the "digital Vinyl" stuff, that looks like the old vinyl records.

dodecahedron: Thanks! I'm very proud of my new domain name! :wink:
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby Halc on Wed Jul 09, 2003 4:45 pm

Anybody still got 1.1.14 stashed somewhere? I accidentally overwrote my copy with 1.1.16.

cheers,
halcy
User avatar
Halc
CD-RW Player
 
Posts: 599
Joined: Mon Feb 04, 2002 9:13 am

Postby dolphinius_rex on Wed Jul 09, 2003 6:18 pm

I'm still experiencing some oddities with 1.1.16, I can't figure them out though. It's as if the speed testing isn't consistant anymore. Sometimes when I test at 40x I get one result which I would expect for 40x, and sometimes I get another result, which I would expect from 32x or maybe 24x... This has only occured for me on 1.1.16 so far, and it's driving me nuts!

has anyone else experienced similar problems?
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

Postby dolphinius_rex on Wed Jul 09, 2003 8:32 pm

rdgrimes wrote:Just tried to scan a 62 min audio CDR, with Kprobe set for "disc size". It continued scanning to 63:30 and then froze.

I've Emailed the author about this.


Confirmed! it attempts to keep scanning even after there is no more data to scan, it just gave me unreadable blocks after it ran out of data, it scared the heck out of me until I realised what was happening!

ARGH! I swear, I'm NEVER going to finish this review! :evil:
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada

PreviousNext

Return to Recordable Media Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

All Content is Copyright (c) 2001-2024 CDRLabs Inc.