Addonics Technologies today announced a family of high speed duplicators that make multiple copies of mSATA SSDs, 2.5-inch SATA HDD/SSDs or micro SATA drives from a single master drive.
Each duplicator comes bundled with a set of 2.5-inch mSATA flash drive kits that turn a mSATA SSD into a 2.5-inch SATA SSD. Depending on model, you can mix and match the mSATA SSD and 2.5-inch SATA hard drive, or the mSATA SSD and micro SATA drive in the duplicator, which makes it a handy tool for transferring the content between the mSATA card and 2.5-inch hard drive or the mSATA card and micro SATA drive.
These stand-alone duplicators offer a distinct advantage because they do not tie up computer resources. They are also operating system independent with a maximum copying speed of 90 MB/sec depending on the media. To start copying, just open the drive bays, load the master media into the source bay, and load equal or larger capacity target media into the target bay. The result is an exact sector-by-sector duplicate including the master boot record. The cloned drive works just like the original.
Models include: 1:5 Combo mSATA SSD HDD Duplicator (MSHDUS5); 1:5 mSATA / micro SATA SSD Duplicator (MSDU5); 1:9 Combo mSATA SSD HDD Duplicator (MSHDUS9HS); and 1:11 mSATA / micro SATA SSD Duplicator (MSDU11).
The Duplicators allow you to copy 5, 9 or 11 drives at one time (depending on the model) from mSATA SSD, 2.5-inch SATA HDD, or a smicro SATA HDD/SSD. Drives are easily added or removed without tools.
By using optional micro SATA-CF or CFast adapters with the 1:5 and 1:11 models, the duplicators can also be used as a CF or CFast card duplicator
The MSRP starts at $849 for the 1:5 model to $1499 for the 1:11 mSATA / micro SATA SSD duplicator. Visit http://www.addonics.com/category/msdhu.php for more information.